ICBO - International Conference of Building Officials

	IAPMO PLUMBING CODE Uniform Plumbing Code Buy ICBO Collections Online subscriptions to multiple documents on various subjects Info To speak with an IHS Subject Matter Expert call 1-888-752-0334, outside the US/Canada call 303-397-2892. More Top ICC Standards...

IAPMO PLUMBING CODE - Uniform Plumbing Code

Scope:
The IAMPO Uniform Plumbing Code publication is both a primer for novices and a reference manual for experienced journeymen and inspectors. It contains hundreds of charts and illustrations, a plumbing dictionary and a checklist for inspectors.

Standards Referenced in the IAPMO PLUMBING CODE:

• ANSI Z21.10.1 - Gas Water Heaters., Volume I Storage, Water Heaters with Input Ratings of 75,000 Btu per hour or less
• ANSI Z21.10.3 - Gas Water Heaters Volume III, Storage, Water Heaters with Input Ratings above 75,000 Btu per hour, Circulating and Instantaneous Water Heaters
• ANSI Z21.11.2 - Gas-fired Room Heaters Volume II, Unvented Room Heaters
• ANSI Z21.12 - Draft Hoods
• ANSI Z21.13 - Gas-fired Low Pressure Steam and Hot Water Boilers
• ANSI Z21.15 - Manually Operated Gas Valves for Appliances, Appliance Connector Valves and Hose End Valves
• ANSI Z21.22 - Relief Valves for Hot Water Supply Systems
• ANSI Z21.24 - Connectors for Gas Appliances
• ANSI Z21.41 - Quick Disconnect Devices for Use with Gas Fuel Appliances
• ANSI Z21.56 - Gas-Fired Pool Heaters
• ANSI Z21.69 - Connectors for Movable Gas Appliances
• ANSI Z21.81 - Cylinder Connection Devices
• ANSI Z21.86 - Gas-Fired Vented Space Heating Appliances
• ANSI Z124.1 - Plastic Bathtub Units
• ANSI Z124.2 - Plastic Shower Units
• ANSI Z124.3 - Plastic Lavatories
• ANSI Z124.4 - Plastic Water Closet Bowls and Tanks
• ANSI Z124.5 - Plastic Toilet (Water Closet) Seats
• ANSI Z124.6 - Plastic Sinks
• ANSI Z124.7 - For Prefabricated Plastic Spa Shells
• ANSI Z124.8 - Plastic Bathtub Liners
• ANSI Z124.9 - Plastic Urinal Fixtures
• ANSI Z358.1 - Emergency Eyewash and Shower Equipment
• ARI 1010 - Self-Contained, Mechanically-Refrigerated Drinking-Water Coolers
• ASHRAE STD 90.1 IP - Energy Standard for Buildings except Low-Rise Residential Buildings
• ASME A112.1.2 - Air Gaps in Plumbing Systems
• ASME A112.1.3 - Air Gap Fittings for Use with Plumbing Fixtures, Appliances, and Appurtenances
• ANSI A112.3.1 - Performance Standard and Installation Procedures for Stainless Steel Drainage Systems for Sanitary, Storm, and Chemical Applications, Above and Below Ground
• ASME A112.3.4 - Macerating Toilet Systems and Related Components
• ANSI A112.4.1 - Water Heater Relief Valve Drain Tubes
• ASME A112.4.3 - Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System
• ANSI A112.6.1M - Floor Affixed Supports for Off-the-floor Plumbing Fixtures for Public Use
• ASME A112.6.2 - Framing-Affixed Supports for Off-the-Floor Water Closets with Concealed Tanks
• ASME A112.14.3 - Grease Interceptors
• ASME A112.14.4 - Grease Removal Devices
• ASME A112.18.1 - .Plumbing Fixture Fittings
• ASME A112.18.3 - Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings
• ASME A112.18.6 - Flexible Water Connectors
• ASME A112.18.7 - Deck Mounted Bath/Shower Transfer Valves with Integral Backflow Protection
• ASME A112.19.1M - Enameled Cast Iron Plumbing Fixtures
• ASME A112.19.2 - Vitreous China Plumbing Fixtures and Hydraulic Requirements for Water Closets and Urinals
• ASME A112.19.3 - Stainless Steel Plumbing Fixtures (Designed for Residential Use)
• ASME A112.19.4M - Porcelain Enameled Formed Steel Plumbing Fixtures
• ASME A112.19.5 - Trim for Water-Closet Bowls, Tanks, and Urinals
• ANSI A112.19.6 - Hydraulic Performance Requirements for Water Closets and Urinals
• ANSI A112.19.7M - Whirlpool Bathtub Appliances
• ANSI A112.19.8M - Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, Hot Tubs, and Whirlpool Bathtub Appliances
• ANSI A112.19.9M - Non-Vitreous Ceramic Plumbing Fixtures
• ASME A112.19.12 - Wall Mounted and Pedestal Mounted, Adjustable and Pivoting Lavatory and Sink Carrier Systems
• ANSI B1.20.1 - Pipe Threads, General Purpose (Inch)
• ANSI B1.20.3 - Dryseal Pipe Threads (Inch)
• ASME B16.1 - Cast Iron Pipe Flanges and Flanged Fittings, Class 25, 125 and 250
• ASME B16.3 - Malleable Iron Threaded Fittings Classes 150 and 300
• ASME B16.4 - Gray-iron Threaded Fittings Classes 125 and 250
• ASME B16.5 - Pipe Flanges and Flanged Fittings NPS 1/2 through NPS 24 Metric/Inch Standard
• ASME B16.12 - Cast Iron Threaded Drainage Fittings
• ASME B16.15 - Cast Bronze Threaded Fittings
• ASME B16.18 - Cast Copper Alloy Solder Joint Pressure Fittings
• ANSI B16.21 - Nonmetallic Flat Gaskets for Pipe Flanges
• ASME B16.22 - Wrought Copper and Copper Alloy Solder Joint Pressure Fittings
• ASME B16.23 - Cast Copper Alloy Solder Joint Drainage Fittings (DWV)
• ASME B16.24 - Cast Copper Alloy Pipe Flanges and Flanged Fittings Class 150, 300, 400, 600, 900, 1500, and 2500
• ANSI B16.26 - Cast Copper Alloy Fittings for Flared Copper Tubes
• ANSI B16.28 - Wrought Steel Buttwelding Short Radius Elbows and Returns
• ASME B16.29 - Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings-DWV
• ANSI B16.32 - Cast Copper Alloy Solder Joint Fittings for Sovent Drainage Systems
• ASME B16.33 - Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 PSI (Sizes NPS 1/2 through NPS 2)
• ASME B16.34 -Valves-Flanged Threaded, and Welding End
• ANSI B16.38 - Large Metallic Valves for Gas Distribution
• ASME B16.39 - Malleable Iron Threaded Pipe Unions
• ANSI B16.47 - Large Diameter Steel Flanges
• ASME B36.10M - Welded and Seamless Wrought-steel Pipe
• ASME B00090 - Section IX: Welding and Brazing Qualifications
• ASSE 1001 - Performance Requirements for Pipe Applied Atmospheric Type Vacuum Breakers
• ASSE 1002 - Performance Requirements for Anti-Siphon Fill Valves (Ballcocks) for Gravity Water Closet Flush Tanks
• ASSE 1003 - Performance Requirements for Water Pressure Reducing Valves
• ASSE 1004 - Performance Requirements for Backflow Prevention Requirements for Commercial Dishwashing Machines
• ASSE 1005 - Performance Requirements for Water Heater Drain Valves 3/4 Inch Size
• ASSE 1006 - Performance Requirements for Residential Use Dishwashers
• ASSE 1007 - Performance Requirements for Home Laundry Equipment
• ASSE 1008 - Performance Requirements for Household Food Waste Disposer Units
• ASSE 1009 - Performance Requirements for Commercial Food Waste Grinder Units
• ASSE 1010 - Performance Requirements for Water Hammer Arresters
• ASSE 1011 - Performance Requirements for Hose Connection Vacuum Breakers
• ASSE 1013 - Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Fire Protection Principle Backflow Preventers
• ASSE 1014 - Performance Requirements for Hand-Held Showers
• ASSE 1015 - Performance Requirements for Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies
• ASSE 1016 - Performance Requirements for Automatic Compensating Valves for Individual Showers and Tub/Shower Combinations
• ASSE 1017 - Performance Requirements for Temperature Actuated Mixing Valves for Hot Water Distribution Systems
• ASSE 1018 - Trap Seal Primer Valves; Water Supply Fed
• ASSE 1019 - Performance Requirements for Vacuum Breaker Wall Hydrants, Freeze Resistant, Automatic Draining Type
• ASSE 1020 - Performance Requirements for Pressure Vacuum Breaker Assembly
• ASSE 1021 -Performance Requirements for Drain Air Gaps for Domestic Dishwasher Applications
• ASSE 1023 - Performance Requirements for Hot Water Dispensers Household Storage Type - Electrical
• ASSE 1025 - Performance Requirements for Diverters for Plumbing Faucets with Hose Spray, Anti-Siphon Type, Residential Applications
• ASSE 1032 - Performance Requirements for Dual Check Valve Type Backflow Preventers for Carbonated Beverage Dispensers, Post Mix Type
• ASSE 1035 - Performance Requirements for Laboratory Faucet Backflow Preventers
• ASSE 1037 - Performance Requirements for Pressurized Flushing Devices (Flushometers) for Plumbing Fixtures
• ASSE 1044 - Performance Requirements for Trap Seal Primer Valves - Drainage Types and Electronic Design Types
• ASSE 1047 - Performance Requirements for Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies
• ASSE 1055 - Performance Requirements for Chemical Dispensing Systems
• ASSE 1056 - Performance Requirements for Spill Resistant Vacuum Breakers
• ASSE 1062 - Performance Requirements for Temperature Actuated, Flow Reduction Valves (TAFR) to Individual Fixture Fittings
• ASSE 1066 - Performance Requirements for Individual Pressure Balancing In-Line Valves for Individual Fixture Fittings
• ASSE 5000 SERIES - Professional Qualifications Standard for Backflow Prevention Assembly Testers, Repairers and Surveyor
• ASSE 6000 SERIES - Professional Qualifications Standard for Medical Gas Systems Installers, Inspectors, Verifiers, Maintenance Personnel and Instructors
• ASTM A 47/A 47M - Standard Specification for Ferritic Malleable Iron Castings
• ASTM A 53/A 53M - Specification for Pipe, Steel, Black and Hot-dipped, Zinc-coated Welded and Seamless
• ASTM A 74 - Specification for Cast Iron Soil Pipe and Fittings
• ASTM A 126 - Standard Specification for Gray Iron Castings for Valves, Flanges and Pipe Fittings
• ASTM A 197/A 197M - Standard Specification for Cupola Malleable Iron
• ASTM A 312/A 312M - Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes
• ASTM A 377 - Standard Index of Specification for Ductile Iron Pressure Pipe
• ASTM A 518/A 518M - Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
• ASTM A 536 - Standard Specification for Ductile Iron Castings
• ASTM A 653/A 653M - Standard Specification for Steel Sheet, Zinc-coated Galvanized or Zinc-iron Alloy-Coated Galvannealed by the Hot-Dip Process
• ASTM A 733 - Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
• ASTM A 861 - Standard Specification for High-Silicon Iron Pipe and Fittings
• ASTM A 888 - Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Application
• ASTM B 29 - Specification for Refined Lead
• ASTM B 32 - Standard Specification for Solder Metal
• ASTM B 42 - Standard Specification for Seamless Copper Pipe, Standard Sizes
• ASTM B 43 - Standard Specification for Seamless Red Brass Pipe, Standard Sizes
• ASTM B 75 - Standard Specification for Seamless Copper Tube
• ASTM B 88 - Standard Specification for Seamless Copper Water Tube
• ASTM B 101 - Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
• ASTM B 135 - Standard Specification for Seamless Brass Tube
• ASTM B 152/B 152M - Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
• ASTM B 251 - Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
• ASTM B 280 - Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
• ASTM B 302 - Standard Specification for Threadless Copper Pipe, Standard Sizes
• ASTM B 306 - Standard Specification for Copper Drainage Tube (DWV)
• ASTM B 370 - Standard Specification for Copper Sheet and Strip for Building Construction
• ASTM B 447 - Standard Specification for Welded Copper Tube
• ASTM B 584 - Standard Specification for Copper Alloy Sand Castings for General Applications
• ASTM B 587 - Standard Specification for Welded Brass Tube
• ASTM B 687 - Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
• ASTM B 813 - Standard Specification for Liquid and Paste Fluxes for Soldering Applications of Copper and Copper Alloy Tube
• ASTM B 819 - Standard Specification for Seamless Copper Tube for Medical Gas Systems
• ASTM B 828 - Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
• ASTM C 14 - Standard Specification for Concrete Sewer, Storm Drain, and Culvert Pipe
• ASTM C 296 - Standard Specification for Asbestos Cement Pressure Pipe
• ASTM C 412 - Standard Specification for Concrete Drain Tile
• ASTM C 425 - Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings
• ASTM C 428 - Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe
• ASTM C 443 - Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
• ASTM C 478 - Standard Specification for Precast Reinforced Concrete Manhole Sections
• ASTM C 564 - Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
• ASTM C 700 - Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
• ASTM C 1053 - Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications
• ASTM C 1173 - Standard Specification for Flexible Transition Couplings for Underground Piping System
• ASTM C 1277 - Standard Specification for Shielded Coupling Joining Hubless Cast Iron Soil Pipe and Fittings
• ASTM C 1440 - Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems
• ASTM C 1460 - Standard Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings above Ground
• ASTM C 1461 - Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV) Sewer, Sanitary and Storm Plumbing Systems for Above and Below Ground Use
• ASTM D 396 - Standard Specification for Fuel Oils
• ASTM D 1527 - Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
• ASTM D 1785 - Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80 and 120
• ASTM D 1869 - Standard Specification for Rubber Rings for Asbestos-Cement Pipe
• ASTM D 2104 - Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40
• ASTM D 2178 - Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing
• ASTM D 2235 - Standard Specification for Solvent Cement for Acrylonitrile Butadiene Styrene (ABS) Plastic Pipe and Fittings
• ASTM D 2239 - Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR.PR) Based on Controlled Inside Diameter
• ASTM D 2241 - Standard Specification for Poly (Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR.Series)
• ASTM D 2282 - Standard Specification for Acrylonitrile Butadiene Styrene (ABS) Plastic Pipe (SDR.PR)
• ASTM D 2321 - Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and other Gravity-Flow Applications
• ASTM D 2447 - Standard Specification for Polyethylene (PE) Plastic Pipe Schedules 40 and 80, Based on Outside Diameter
• ASTM D 2464 - Standard Specification for Threaded Poly (Vinly Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
• ASTM D 2466 - Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
• ASTM D 2467 - Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
• ASTM D 2468 - Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40
• ASTM D 2513 - Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
• ASTM D 2517 - Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
• ASTM D 2564 - Standard Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems
• ASTM D 2609 - Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
• ASTM D 2661 - Standard Specification for Acrylonitrile.Butadiene.Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
• ASTM D 2665 - Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
• ASTM D 2657 - Standard Practice for Heat Fusion-Joining of Polyolefin Pipe and Fitting
• ASTM D 2672 - Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement
• ASTM D 2680 - Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
• ASTM D 2729 - Standard Specification for Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings
• ASTM D 2737 - Standard Specification for Polyethylene (PE) Plastic Tubing
• ASTM D 2751 - Standard Specification for Acrylonitrile -Butadiene-Styrene (ABS) Sewer Pipe and Fittings
• ASTM D 2846/D 2846M - Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot and Cold Water Distribution Systems
• ASTM D 2855 - Standard Practice for Making Solvent-Cemented Joints with Poly (Vinyl Chloride) (PVC) Pipe and Fittings
• ASTM D 2996 - Standard Specification for Filament-Wound Fiberglass (Glass Fiber Reinforced Thermosetting Resin) Pipe
• ASTM D 3034 - Standard Specification for Type PSM Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings
• ASTM D 3035 - Standard Specification fro Polyethylene (PE) Plastic Pipe (DR.PR) Based on Controlled outside Diameter
• ASTM D 3122 - Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings
• ASTM D 3138 - Standard Specification for Solvent Cements for Transition Joints between Acrylonitrile-Butadiene-Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Non-Pressure Piping Components
• ASTM D 3139 - Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
• ASTM D 3212 - Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
• ASTM D 3311 - Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
• ASTM D 3965 - Standard Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
• ASTM D 4068 - Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water Containment Membrane
• ASTM D 4101 - Standard Specification for Polypropylene Injection and Extrusion Materials
• ASTM D 4551 - Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane
• ASTM D 6104 - Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
• ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials
• ASTM E 119 - Standard Test Methods for Fire Tests of Building Construction and Materials
• ASTM E 814 - Standard Test Method for Fire Tests of Through-Penetration Fire Stops
• ASTM F 402 - Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
• ASTM F 405 - Standard Specification for Corrugated Polyethylene (PE) Tubing and Fittings
• ASTM F 409 - Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
• ASTM F 437 - Standard Specification for Threaded Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe, Pipe Fittings, Schedule 80
• ASTM F 438 - Standard Specification for Socket-Type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
• ASTM F 439 - Standard Specification for Socket-Type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
• ASTM F 441/F 441M - Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
• ASTM F 442/F 442M - Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe (SDR.PR)
• ASTM F 480 - Standard Specification for Thermoplastic Well Casing Pipe and Couplings made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
• ASTM F 493 - Standard Specification for Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
• ASTM F 628 - Standard Specification for Acrylonitrile.Butadiene.Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core Table
• ASTM F 794 - Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
• ASTM F 876 - Standard Specification for Crosslinked Polyethylene (PEX) Tubing
• ASTM F 877 - Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot and Cold-Water Distribution Systems
• ASTM F 891 - Standard Specification for Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core
• ASTM F 949 - Standard Specification for Poly (Vinyl Chloride) (PVC) Corrugated Sewer Pipe with a Smooth Interior and Fittings
• ASTM F 1216 - Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
• ASTM F 1281 - Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
• ASTM F 1282 - Standard Specification for Polyethylene/Aluminum/Polyethylene (PE.AL.PE) Composite Pressure Pipe
• ASTM F 1412 - Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
• ASTM F 1673 - Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
• ASTM D 1743 -Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
• ASTM F 1807 - Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing
• ASTM F 1866 - Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
• ASTM F 1948 - Standard Specification for Metallic Mechanical Fittings for use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
• ASTM F 1960 - Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-Linked Polyethylene (PEX) Tubing
• ASTM F 1961 - Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing
• ASTM F 1970 - Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
• ASTM F 1973 - Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) Fuel Gas Distribution Systems
• ASTM F 1974 - Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Cross-Linked Polyethylene Composite Pressure Pipe
• ASTM F 2080 - Standard Specification for Cold-expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe
• ASTM G 21 - Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
• AWS A5.8/A5.8M - Specification for Filler Metals for Brazing and Braze Welding
• AWS B2.2 - Brazing Procedure and Performance Qualification
• AWWA C110 - Ductile-Iron and Gray-Iron Fittings for Water
• AWWA C115 - Flanged Ductile-Iron Pipe with Ductile-iron or Gray-Iron Threaded Flanges
• AWWA C151 - Ductile-Iron Pipe, Centrifugally Cast, for Water
• AWWA C153 - Ductile-Iron Compact Fittings for Water Service
• AWWA C203 - Coal-Tar Protective Coatings and Linings for Steel Water Pipelines - Enamel and Tape - Hot Applied
• AWWA C213 - Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines
• AWWA C215 - Extruded Polyolefin Coatings for the Exterior of Steel Water Pipe Lines
• AWWA C400 - Asbestos-Cement Pressure Pipe, 4 In. through 16 In. (100 mm through 400 mm), for Water Distribution Systems
• AWWA C504 - Rubber-Seated Butterfly Valves
• AWWA C507 - Ball Valves, 6 In. through 48 In. (150 mm through 1200 mm)
• AWWA C510 - Double Check Valve Backflow Prevention Assembly
• AWWA C511 - Reduced-Pressure Principle Backflow Prevention Assembly
• AWWA C606 - Grooved and Shouldered Joints
• AWWA C900 - Polyvinyl Chloride (PVC) Pressure Pipe, 4" through 12" for Water Distribution
• AWWA C901 - Polyethylene (PE) Pressure Pipe and Tubing, 1/2 In. (13 mm) through 3 In. (76 mm), for Water Service
• AWWA C902 - Polybutyleme (PB) Pressure Pipe, Tubing, and Fittings, 1/2 In. through 3 In., for Water
• CISPI 301 - Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
• CISPI 310 - Specification for Coupling for use in Connection with Hubless Castiron Soil Pipe and Fittings for Sanitary and Storms Drain, Waste, and Vent Piping Applications
• CSA 6.26 - Fuel Gas Piping Systems using Corrugated Stainless Steel Tubing (CSST)
• ISO GUIDE 65 - General Requirements for Bodies Operating Product Certification Systems
• A-A-50555 - Pumping Units, Sewage, Duplex, Centrifugal, Automatic Wet-Pit Type
• A-A-51145 - Flux, Soldering, Non-Electronic, Paste and Liquid
• A-A-59617 - Unions, Brass or Bronze, Threaded Pipe Connections and Solder-Joint Tube Connections
• O-F-499 - Flux, Brazing, (Silver Brazing Filler Metal, Low Melting Point)
• O-F-506 - Flux Soldering: Paste and Liquid
• WW-P-541 - Plumbing Fixtures (General Specification)
• MIL-F-1183 - Fitting, Tube, Cast Bronze, Silver-Brazing
• MIL-P-22561 - Pipe and Pipe-Fittings Acid Resistant
• MIL-P-52407 - Pump, Centrifugal: Electric-Motor-Driven Shallow Well (For Water)
• MIL-P-62156 - Pump, Submersible, Bilge, Axial Flow: Electric-Motor-Driven
• MIL-V-29193 - Valve, Flush (Flushometer) Water Closet, Urinal
• MSS SP 25 - Standard Marking System for Valves, Fittings, Flanges and Unions
• MSS SP 42 - Class 150 Corrosion Resistant Gate, Globe, Angle, and Check Valves with Flanged and Butt Weld Ends
• MSS SP 44 - Steel Pipeline Flanges
• MSS SP 58 - Pipe Hangers and Supports - Materials, Design, and Manufacture
• MSS SP 67 - Butterfly Valves
• MSS SP 70 - Cast Iron Gate Valves, Flanged and Threaded Ends
• MSS SP 71 - Cast Iron Swing Check Valves, Flanged and Threaded Ends
• MSS SP 72 - Ball Valves with Flanged or Butt-Welding Ends for General Service
• MSS SP 73 - Brazing Joints for Copper and Copper Alloy Pressure Fittings
• MSS SP 78 - Cast Iron Plug Valves, Flanged and Threaded Ends
• MSS SP 80 - Bronze Gate, Globe, Angle and Check Valves
• MSS SP 83 - Class 3000 Steel Pipe Unions, Socket Welding and Threaded
• NFPA 13D - Installation of Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes
• NFPA 13R - Installation of Sprinkler Systems in Residential Occupancies Up to and Including Four Stories in Height
• NFPA 31 - Installation of Oil-Burning Equipment
• NFPA 54 - National Fuel Gas Code
• NFPA 58 - Liquefied Petroleum Gas Code
• NFPA 85 - Boiler and Combustion System Hazards Code (Note: NFPA 8503 has been incorporated into NFPA 85)
• NFPA 99 - Standard for Health Care Facilities
• NFPA 99C - Gas and Vacuum Systems
• NFPA 211 - Standard for Chimneys, Fireplaces, Vents and Solid Fuel-Burning Appliances
• NSF 3 - Commercial Warewashing Equipment
• NSF 12 - Automatic Ice Making Equipment
• NSF 14 - Plastics Piping System Components and Related Materials
• NSF 18 - Manual Food and Beverage Dispensing Equipment
• NSF 24 - Plumbing System Components for Manufactured Homes and Recreational Vehicles
• NSF 29 - Detergent and Chemical Feeders for Commercial Spray-Type Dishwashing Machines
• NSF 40 - Residential Wastewater Treatment Systems
• NSF 41 - Non-Liquid Saturated Treatment Systems
• NSF 42 - Drinking Water Treatment Units - Aesthetic Effects
• NSF 44 - Residential Cation Exchange Water Softeners
• NSF 46 - Evaluation of Components and Devices Used in Wastewater Treatment Systems
• NSF 53 - Drinking Water Treatment Units - Health Effects
• NSF 58 - Reverse Osmosis Drinking Water Treatment Systems
• NSF 61 - Drinking Water System Components - Health Effects
• NSF 62 - Drinking Water Distillation Systems
• NSPI 1 - Standard for Public Swimming Pools
• PDI WH 201 - Water Hammer Arresters
• SAE J1670 - Type "F" Clamps for Plumbing Applications
• UL 80 - Steel Tanks for Oil-Burner Fuel
• UL 103 - Factory-Built Chimneys, for Residential Type and Building Heating Appliances
• UL 125 - Valves for Anhydrous Ammonia and LP-Gas (Other than Safety Relief)
• UL 132 - Safety Relief Valves for Anhydrous Ammonia and LP-Gas
• UL 144 - LP-Gas Regulators
• UL 174 - Household Electric Storage Tank Water Heaters
• UL 343 - Pumps for Oil-Burning Appliances
• UL 352 - Constant-Level Oil Valves
• UL 378 - Draft Equipment
• UL 399 - Drinking Water Coolers
• UL 430 - Waste Disposers
• UL 441 - Gas Vents
• UL 443 - Steel Auxillary Tanks for Oil-Burner Fuel
• UL 499 - Electric Heating Appliances
• UL 563 - Ice Makers
• UL 569 - Pigtails and Flexible Hose Connectors for LP-Gas
• UL 723 - Test for Surface Burning Characteristics of Building Materials
• UL 726 - Oil-Fired Boiler Assemblies
• UL 732 - Oil-Fired Storage Tank Water Heaters
• UL 749 - Household Dishwashers
• UL 778 - Motor-Operated Water Pumps
• UL 834 - Heating, Water Supply and Power Boilers Electric
• UL 921 - Commercial Electric Dishwashers
• UL 1453 - Electronic Booster and Commercial Storage Tank Water Heaters