| |
ICBO - International Conference of Building Officials
 |
| ICBO BUILDING CODE |
| Uniform Building Code - 3 Volume Set |
 Buy |
ICBO Collections
Online subscriptions to multiple documents on various subjects |
Info |
| To speak with an IHS Subject Matter Expert call 1-888-752-0334, outside the US/Canada call 303-397-2892. |
|
|
ICBO BUILDING CODE - Uniform Building Code - 3 Volume Set
Scope:
The provisions of this code shall apply to the construction, alteration, moving, demolition, repair, maintenance and use of any building or structure within this jurisdiction, except work located primarily in a public way, public utility towers and poles, mechanical equipment not specifically regulated in this code, and hydraulic flood control structure. Volume 1 contains administrative, fire- and life-safety and field inspection provisions; Volume 2 contains structural engineering design provisions; and Volume 3 contains material, testing and installation standards.
Standards Referenced in the ICBO BUILDING CODE:
- 16 CFR 1000-END - Commercial Practices; Part 1201
- ACI 318/318R - Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary (ACI 318R-05)
- ASME A17.1 - Safety Code for Elevators and Escalators
- ASME A17.3 - Safety Code for Existing Elevators & Escalators Includes Requirements for Electric and Hydraulic Elevators and Escalators
- ANSI A42.4 - Specification for Interior Lathing and Furring
- ANSI A135.6 - Hardboard Siding Table
- ANSI A117.1 - Accessible and Usable Buildings and Facilities
- ANSI A190.1 - Wood Products-Structural Glued Laminated Timber
- ANSI A194.1 - Cellulosic Fiber Board
- ANSI A208.1 - Particleboard
- ANSI O5.1 - Specifications and Dimensions (For Wood Poles)
- ANSI Z97.1 - For Safety Glazing Materials Used in Buildings - Safety Performance Specifications and Methods of Test
- AITC 117 - Structural Glued Laminated Timber of Softwood Species
- AITC 119 - Standard Specifications for Structural Glued Laminated Timber of Hardwood Species
- AITC 200 - Inspection Manual for Structural Glued Laminated Timber
- AITC 500 - Determination of Design Values for Structural Glued Laminated Timber
- APA 1 - For Floors & Flooring-Mosaic-Parquet Hardwood Slat
- ASCE 7 -Minimum Design Loads for Buildings and Other Structures
- ASCE 8 - Standard Specification for the Design of Cold-formed Stainless Steel Structural Members
- ASCE 16 - Standard for Load Resistance Factor Design (LRFD) for Engineered Wood Construction.
- ASCE 17 - Air-Supported Structures
- ASHRAE STD 62.1 - Ventilation for Acceptable Indoor Air Quality
- ASTM A 27/A 27M - Standard Specification for Steel Castings, Carbon, for General Application
- ASTM A 36/A 36M - Standard Specification for Carbon Structural Steel
- ASTM A 48/A 48M - Standard Specification for Gray Iron Castings
- ASTM A 53/A 53M - Specification for Pipe, Steel, Black and Hot-dipped, Zinc-Coated Welded and Seamless
- ASTM A 82 - Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
- ASTM A 148/A 148M - Standard Specification for Steel Castings, High Strength, for Structural Purposes
- ASTM A 184/A 184M - Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
- ASTM A 185 - Standard Specification for Steel Welded Wire Reinforcement, Plain for Concrete
- ASTM A 219 - Standard Methods of Test for Local Thickness of Electrodeposited Coatings
- ASTM A 239 - Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
- ASTM A 242/A 242M - Standard Specification for High-Strength Low-Alloy Structural Steel
- ASTM A 252 - Standard Specification for Welded and Seamless Steel Pipe Piles
- ASTM A 283/A 283M - Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
- ASTM A 307 - Standard Specification for Carbon Steel Bolts and Studs, 60,000 PSI Tensile Strength
- ASTM A 325 - Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
- ASTM A 326 - Zinc-Coated (Galvanized) High Tensile Steel Teleph
- ASTM A 416/A 416M - Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
- ASTM A 421/A 421M - Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
- ASTM A 441/A 441M - Specification for High-Strength Low-Alloy Stuctural Manganese Vanadium Steel
- ASTM A 446/A 446M - Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Structural (Physical) Quality
- ASTM A 449 - Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 KSI Minimum Tensile Strength, General use
- ASTM A 490 - Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
- ASTM A 496 - Standard Specification for Steel Wire, Deformed for Concrete Reinforcement
- ASTM A 500 - Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
- ASTM A 501 - Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
- ASTM A 502 - Standard Specification for Rivets, Steel, Structural
- ASTM A 514/A 514M - Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
- ASTM A 525 - Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process
- ASTM A 529/A 529M - Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
- ASTM A 563 - Standard Specification for Carbon and Alloy Steel Nuts
- ASTM A 568/A 568M - Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
- ASTM A 569/A 569M -Standard Specification for Steel, Carbon (0.15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial
- ASTM A 570/A 570M - Standard Specification for Structural Steel, Sheet and Strip, Carbon, Hot Rolled
- ASTM A 572/A 572M - Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
- ASTM A 588/A 588M - Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi (345 mpa) Minimum Yield Point to 4 inches (100 mm) Thick
- ASTM A 606 - Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
- ASTM A 607 - Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled and Cold-Rolled
- ASTM A 611 - Standard Specification for Structural Steel (SS), Sheet, Carbon, Cold Rolled
- ASTM A 615/A 615M - Standard Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
- ASTM A 616/A 616M - Standard Specification for Rail-Steel Deformed and Plain Bars for Concrete Reinforcement
- ASTM A 617/A 617M - Specification for Axle-Steel Deformed and Plain Bars for Concrete Reinforcement
- ASTM A 618/A 618M - Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
- ASTM A 653/A 653M - Standard Specification for Steel Sheet, Zinc-coated Galvanized or Zinc-iron Alloy-Coated Galvannealed by the Hot-dip Process
- ASTM A 666 - Standard Specification for Annealed Or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
- ASTM A 668/A 668M - Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial use
- ASTM A 690/A 690M - Standard Specification for High-Strength Low-Alloy Steel H-Piles and Sheet Piling for use in Marine Environments
- ASTM A 706/A 706M - Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
- ASTM A 715 - Specification for Steel Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled, and Steelsheet, Cold-Rolled, High-Strength, Low-Alloy with Improved Formability
- ASTM A 722/A 722M - Standard Specification for Uncoated High-Strength Steel Bar for Prestressing Concrete
- ASTM A 767/A 767M - Standard Specification for Zinc-coated (Galvanized) Steel Bars for Concrete Reinforcement
- ASTM A 775/A 775M - Standard Specification for Epoxy-Coated Steel Reinforcing Bars
- ASTM A 852/A 852M - Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate With 70 ksi (485 mpa) Minimum Yield
- ASTM A 884 /A 884M- Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Fabric for Reinforcement
- ASTM A 934/A 934M - Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
- ASTM B 134/B 134M - Specification for Brass Wire
- ASTM B 211 - Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
- ASTM B 250/B 250M - Standard Specification for General Requirements for Wrought Copperalloy Wire
- ASTM C 5 - Standard Specification for Quicklime for Structural Purposes
- ASTM C 6 - Specification for Normal Finishing Hydrated Lime
- ASTM C 20 - Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
- ASTM C 22/C 22M - Standard Specification for Gypsum
- ASTM C 27 - Standard Specification for Standard Classification of Fireclay and High-Alumina Refractory Brick
- ASTM C 28/C 28M - Standard Specification for Gypsum Plasters
- ASTM C 31/C 31M - Standard Practice for Making and Curing Concrete Test Specimens in the Field
- ASTM C 33 - Standard Specification for Concrete Aggregates
- ASTM C 34 - Standard Specification for Structural Clay Load-Bearing Wall Tile
- ASTM C 35 - Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster
- ASTM C 36/C 36M - Standard Specification for Gypsum Wallboard
- ASTM C 37/C 37M - Standard Specification for Gypsum Lath
- ASTM C 39/C 39M - Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C 42/C 42M - Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
- ASTM C 55 - Standard Specification for Concrete Brick
- ASTM C 56 - Standard Specification for Structural Clay Non-Load Bearing Tile
- ASTM C 61/C 61M -Standard Specification for Gypsum Keene's Cement
- ASTM C 62 - Standard Specification for Building Brick (Solid Masonry Units Made from Clay or Shale)
- ASTM C 67 -Standard Test Methods of Sampling and Testing Brick and Structural Clay Tile
- ASTM C 73 -Standard Specification for Calcium Silicate Face Brick (Sand-Lime Brick)
- ASTM C 79/C 79M -Standard Specification for Gypsum Sheathing Board
- ASTM C 90 -Standard Specification for Loadbearing Concrete Masonry Units
- ASTM C 91 - Standard Specification for Masonry Cement
- ASTM C 94/C 94M - Standard Specification for Ready-Mixed Concrete
- ASTM C 109/C 109M - Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
- ASTM C 126 -Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
- ASTM C 129 - Standard Specification for Nonload-bearing Concrete Masonry Units and Related Units
- ASTM C 140 - Standard Test Method Sampling and Testing Concrete Masonry Units and Related Units
- ASTM C 144 - Standard Specification for Aggregate for Masonry Mortar
- ASTM C 150 - Standard Specification for Portland Cement
- ASTM C 172 - Standard Practice for Sampling Freshly Mixed Concrete
- ASTM C 192/C 192M - Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
- ASTM C 199 - Standard Test Method for Pier Test for Refractory Mortars
- ASTM C 207 - Standard Specification for Hydrated Lime for Masonry Purposes
- ASTM C 212 -Standard Specification for Structural Clay Facing Tile
- ASTM C 216 -Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
- ASTM C 222 - Standard Specification for Asbestos-Cement Roofing Shingles
- ASTM C 260 - Standard Specification for Air-Entraining Admixtures for Concrete
- ASTM C 270 -Standard Specification for Mortar for Unit Masonry
- ASTM C 315 -Standard Specification for Clay Flue Liners
- ASTM C 317/C 317M -Standard Specification for Gypsum Concrete
- ASTM C 330 - Standard Specification for Lightweight Aggregates for Structural Concrete
- ASTM C 331 - Standard Specification for Lightweight Aggregates for Concrete Masonry Units
- ASTM C 332 - Specification for Lightweight Aggregates for Insulating Concrete
- ASTM C 404 - Standard Specification for Aggregates for Masonry Grout
- ASTM C 406 - Standard Specification for Roofing Slate
- ASTM C 426 - Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
- ASTM C 442/C 442M - Standard Specification for Gypsum Backing Board and Coreboard and Gypsum Shaftliner Board
- ASTM C 472 - Standard Specification for Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete
- ASTM C 475/C 475M - Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Wallboard
- ASTM C 476 - Standard Specification for Grout for Masonry
- ASTM C 492 - Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
- ASTM C 494/C 494M -Standard Specification for Chemical Admixtures for Concret
- ASTM C 496 - Splitting Tensile Strength of Cylindrical Concrete Specimens
- ASTM C 514 - Standard Specification for Nails for the Application of Gypsum Board
- ASTM C 516 - Standard Specifications for Vermiculite Loose Fill Thermal Insulation
- ASTM C 530 - Specification for Structural Clay Non-Load Bearing Screen Tile
- ASTM C 557 - Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
- ASTM C 567 - Standard Test Method for Determining Density of Structural Lightweight Concrete
- ASTM C 588/C 588M - Standard Specification for Gypsum Base for Veneer Plasters
- ASTM C 595 -Standard Specification for Blended Hydraulic Cements
- ASTM C 618 -Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use as a Mineral Admixture in Concrete.
- ASTM C 630/C 630M - Standard Specification for Water-Resistant Gypsum Backing Board
- ASTM C 635 - Standard Specification for the Manufacturer, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-In Panel Ceiling
- ASTM C 636- Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
- ASTM C 652 - Standard Specification for Hollow Brick (Hollow Masonry Units Made from Clay or Shale)
- ASTM C 685/C 685M - Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
- ASTM C 843 - Standard Specification for Application of Gypsum Veneer Plaster
- ASTM C 844 - Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
- ASTM C 845 - Standard Specification for Expansive Hydraulic Cement
- ASTM C 895 - Standard Test Method for Lead and Cadmium Extracted From Glazed Ceramic Tile
- ASTM C 931/C 931M -Standard Specification for Exterior Gypsum Soffit Board
- ASTM C 989 - Standard Specification for Ground Granulated Blast-furnace Slag for Use in Concrete and Mortars
- ASTM C 1002 - Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
- ASTM C 1017/C 1017M - Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete
- ASTM C 1019 - Standard Test Method for Sampling and Testing Grout
- ASTM C 1036 - Standard Specification for Flat Glass
- ASTM C 1157 - Standard Performance Specification for Hydraulic Cement
- ASTM C 1218/C 1218M - Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
- ASTM C 1261 - Standard Specifications for Firebox Brick for Residential Fireplaces
- ASTM C 1240 - Standard Specification for Silica Fume Used in
- ASTM D 25 - Standard Specification for Round Timber Piles
- ASTM D 245 - Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber
- ASTM D 312 - Standard Specification for Asphalt Used in Roofing
- ASTM D 412 - Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers - Tension
- ASTM D 450 - Standard Specification for Coal-tar Pitch Used in Roofing, Dampproofing and Waterproofing
- ASTM D 471 - Standard Test Method for Rubber Property-Effect of Liquids
- ASTM D 570 - Standard Test Method for Water Absorption of Plastics
- ASTM D 624 - Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
- ASTM D 638 - Standard Test Method for Tensile Properties of Plastics
- ASTM D 751 - Standard Test Methods for Coated Fabrics
- ASTM D 816 - Standard Test Methods for Rubber Cements
- ASTM D 905 - Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
- ASTM D 1004 - Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
- ASTM D 1037 -Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
- ASTM D 1101 - Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use
- ASTM D 1204 - Standard Test Method for Linear Dimensional Changes of Non-Rigid Thermoplastic Sheeting or Film at Elevated Temperature
- ASTM D 1333 - Methods of Testing Elastic Fabrics
- ASTM D 1556 - Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method
- ASTM D 1557 - Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
- ASTM D 1929 - Standard Test Method for Determining Ignition Temperature of Plastics
- ASTM D 1970 - Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection
- ASTM D 1990 - Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens
- ASTM D 2136 - Standard Test Method for Coated Fabrics - Low-Temperature Bend Test
- ASTM D 2137 - Standard Test Methods for Rubber Property -Brittleness Point of Polymers and Coated Fabrics
- ASTM D 2167 - Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
- ASTM D 2487 - Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
- ASTM D 2555 - Standard Test Methods for Establishing Clear Wood Strength Values
- ASTM D 2559 - Standard Specification for Adhesives for Structural Laminated Wood Products for Use under Exterior (Wet Use) Exposure Conditions
- ASTM D 2843 - Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
- ASTM D 2898 - Standard Test Methods for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
- ASTM D 2922 - Standard Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
- ASTM D 2937 - Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
- ASTM D 5055 - Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
- ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials
- ASTM E 90 - Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
- ASTM E 119 - Standard Test Methods for Fire Tests of Building Construction and Materials
- ASTM E 136 - Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750 Degrees C
- ASTM E 336 - Standard Test Method for Measurement of Airborne Sound Insulation in Buildings
- ASTM E 413 - Classification for Rating Sound Insulation
- ASTM E 492 - Standard Method for Laboratory Measurement of Impact Sound Transmission Through Floor-ceiling Assemblies Using the Tapping Machine
- ASTM E 814 - Standard Test Method for Fire Tests of Through-Penetration Fire Stops
- ASTM E 1399 - Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
- ASTM F 1346 - Standard Performance Specification for Safety Covers and Labeling Requirements for all Covers for Swimming Pools, Spas and Hot Tubs
- ASTM PS 20 - Corrugated Polyethylene (PE) Pipe and Fittings made Using Recycled Polyethylene Materials
- AWPA C1 - All Timber Products - Preservative Treatment by Pressure Processes
- AWPA C2 - Lumber, Timbers, Bridge Ties and Mine Ties. Preservative Treatment by Pressure Processes
- AWPA C3 - Piles - Preservative Treatment by Pressure Processes
- AWPA C4 - Poles - Preservative Treatment by Pressure Processes
- AWPA C9 - Plywood - Preservative Treatment by Pressure Processes
- AWPA C14 - Wood for Highway Construction-Preservative Treatment by Pressure Process
- AWPA C15 - Wood for Commercial-Residential Construction Preservative Treatment by Pressure Process
- AWPA C16 - Wood Used on Farms-Preservative Treatment by Pressure Processes
- AWPA C22 - Lumber and Plywood for Permanent Wood Foundations-Preservative Treatment by Pressure Processes
- AWPA C23 - Round Poles and Posts Used in Building Construction-Preservative Treatment by Pressure Processes
- AWPA C24 - Sawn Timber Used to Support Residential and Commercial Structures
- AWPA C28 - Standard for Preservative Treatment of Structural Glued Laminated Members and Laminations before Gluing of Southern Pine, Pacific Coast Douglas Fir, Hem Fir and Western Hemlock by Pressure Processes
- AWPA M4 - Standard for the Care of Preservative-Treated Wood Products
- AWS D1.1/D1.1M - Structural Welding Code-Steel
- AWS D1.4 - Structural Welding Code-Reinforcing Steel (AWS D1.4)
- NAAMM FP 1001 - Guide Specifications for Design of Metal Flagpoles
- NBS PS 1 - Construction and Industrial Plywood
- NBS PS 20 - American Softwood Lumber Standard
- NFPA 13 - Installation of Sprinkler System
- NFPA 13D - Installation of Sprinkler Systems in One- and Two-family Dwellings and Manufactured Home
- NFPA 13R - Installation of Sprinkler Systems in Residential Occupancies Up to and Including Four Stories in Height
- NFPA 14 - Installation of Standpipe, Private Hydrants and Hose System
- NFPA 80 - Fire Doors and Fire Windows
- UU-B-790 - Building Paper, Vegetable Fiber: (Kraft, Waterproofed, Water Repellent and Fire Resistant)
- TIA-222 - Structural Standards for Steel Antenna Towers and Antenna Supporting Structures
- UL 10A - Tin-Clad Fire Doors
- UL 10B - Fire Tests of Door Assemblies
- UL 33 - Heat Responsive Links for Fire-Protection Service
- UL 55A - Materials for Built-Up Roof Coverings
- UL 353 - Limit Controls
- UL 555 - Fire Dampers
- UL 555C - Ceiling Dampers
- UL 555S - Smoke Dampers
- UL 790 - Test Methods for Fire Tests of Roof Coverings
- UL 1975 - Fire Tests for Foamed Plastics Used for Decorative Purposes
|
|
CONSTRUCTION ENGINEERING STANDARDS NEWS
|
|
|