| |
ICC - International Code Council

 |
| ICC IFC |
| International Fire Code |
Buy |
ICC Collections Online subscriptions to multiple documents on various subjects |
Info |
| To speak with an IHS Subject Matter Expert call 1-888-752-0334, outside the US/Canada call 303-397-2892. |
|
 |
ICC IFC - International Fire Code Scope: This code establishes regulations affecting or relating to structures, processes, premises and safeguards regarding: 1.The hazard of fire and explosion arising from the storage, handling or use of structures, materials or devices; 2. Conditions hazardous to life, property or public welfare in the occupancy of structures or premises; 3. Fire hazards in the structure or on the premises from occupancy or operation; 4. Matters related to the construction, extension, repair, alteration or removal of fire suppression or alarm systems. Standards Referenced in the ICC IFC:
- 16 CFR 1000-END - Commercial Practices; Part 1500 - Hazardous Substances and Articles; Administration and Enforcement Regulations, Part 1500.41 - Method for Testing Primary Irritant Substances, Part 1500.42 - Test for Eye Irritants, Part 1500.44 - Method for Testing Extremely Flammable, Flammable Solids, Part 1507 - Fireworks Devices, Part 1632 - Standard for the Flammability of Mattress and Mattress Pads
- 27 CFR 1-199 - Alcohol, Tobacco Products and Firearms; Part 55 - Commerce in Explosives
- 29 CFR 1910 - Labor (1910.1000-END); Part 1910.1000 - Air Contaminants, Part 1910.1200 - Hazard Communication, Part 154 - Facilities Transferring Oil or Hazardous Material in Bulk and Part 155 - Oil or Hazardous Material Pollution Prevention Regulations for Vessel
- 33 CFR 1-124 - Navigation and Navigable Waters; Part 156 - Oil and Hazardous Material Transfer Operations
- 46 CFR 1-40 - Shipping; Parts 30, 32, 35 & 39
- 49 CFR 1-99 - Transportation; Part 1 Transportation
- 49 CFR 100-185 - Transportation; Parts 100-178 - Hazardous Materials Regulations
- AASHTO HB - Standard Specifications for Highway Bridges
- ANSI A13.1 - Scheme for the Identification of Piping Systems
- ASME A17.1 - Safety Code for Elevators and Escalators
- ASME A17.3 - Safety Code for Existing Elevators & Escalators Includes Requirements for Electric and Hydraulic Elevators and Escalators
- ASME A18.1 - Safety Standard for Platform Lifts and Stairway Chairlifts
- ANSI A117.1 - Accessible and Usable Buildings and Facilities
- ASME B16.18 - Cast Copper Alloy Solder Joint Pressure Fittings
- ASME B16.22 - Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings
- ASME B31.3 - Process Piping,
- ANSI B31.9 - Building Services Piping
- ASME Boiler and Pressure Vessel Code
- API SPEC 12P - Specification for Fiberglass Reinforced Plastic Tanks
- API RP 651 - Cathodic Protection of Aboveground Petroleum Storage Tanks
- API STD 653 - Tank Inspection, Repair, Alteration and Reconstruction
- API RP 752 - Management of Hazards Associated with Location of Process Plant Buildings
- API RP 1604 - Closure of Underground Petroleum Storage Tanks
- API RP 1615 - Installation of Underground Petroleum Storage Systems
- API STD 2000 - Venting Atmosphere and Low Pressure Storage Tanks - Nonrefrigerated and Refrigerated
- API RP 2001 - Fire Protection in Refineries
- API RP 2003 - Protection against Ignitions Arising out of Static, Lightening, and Stray Currents
- API PUBL 2009 - Safe Welding, Cutting, and Hot Work Practices in the Petroleum and Petrochemical Industries
- API STD 2015 - Safe Entry and Clearing of Petroleum Storage Tanks
- API RP 2023 - Guide for Safe Storage and Handling of Heated Petroleum-Derived Asphalt Products and Crude-Oil Residual
- API RP 2028 - Flame Arrestors in Piping Systems
- API RP 2201 - Safe Hot Tapping Practices in the Petroleum & Petrochemical Industries
- API RP 2350 - Overfill Protection for Storage Tanks in Petroleum Facilities
- ASTM B 42 - Standard Specification for Seamless Copper Pipe, Standard Sizes
- ASTM B 43 - Standard Specification for Seamless Red Brass Pipe, Standard Sizes
- ASTM B 68 - Standard Specification for Seamless Copper Tube, Bright Annealed
- ASTM B 88 - Standard Specification for Seamless Copper Water Tube
- ASTM B 251 - Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
- ASTM B 280 - Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
- ASTM D 56 - Standard Test Method for Flash Point by Tag Closed Tester
- ASTM D 86 - Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
- ASTM D 92 - Standard Test Method for Flash and Fire Points by Cleveland Open Cup
- ASTM D 93 - Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester
- ASTM D 323 - Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
- ASTM D 3278 - Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
- ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials
- ASTM E 681 - Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
- ASTM E 1529 - Standard Test Method for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
- ASTM E 1537 - Standard Test Method for Fire Testing of Upholstered Furniture
- ASTM E 1590 - Standard Test Method for Fire Testing of Mattresses
- CGA C7 - Guide to Preparation of Precautionary Labeling and Marking of Compressed Gas Containers
- CGA P1 - Safe Handling of Compressed Gases in Containers
- CGA P18 - Bulk Inert Gas Systems at Consumer Sites
- CGA S1.1 - Pressure Relief Device Standards-Part 1-Cylinders for Compressed Gases
- CGA S1.2 - Pressure Relief Device Standards-Part 2-Cargo and Portable Tanks for Compressed Gases
- CGA S1.3 - Pressure Relief Device Standards-Part 3-Stationary Storage Containers for Compressed Gases
- CGA V1 - Compressed Gas Association Standard for Compressed Gas Cylinder Valve Outlet and Inlet Connections
- ICC 300 - Bleachers, Folding and Telescopic Seating, and Grandstands
- ICC IBC - International Building Code
- ICC IEC - International Electrical Code
- ICC IEBC - International Existing Building Code
- ICC IFGC - International Fuel and Gas Code
- ICC IMC - International Mechanical Code
- ICC IPC - International Plumbing Code
- ICC IPMC - International Property Maintenance Code
- ICC IRC - International Residential Code
- ICC IUWIC - International Urban-Wildland Interface Code
- NEMA 250 - Enclosures for Electrical Equipment (1000 Volts Maximum)
- NFPA 10 - Standard for Portable Fire Extinguishers
- NFPA 11 - Standard for Low-, Medium-, and High-Expansion Foam
- NFPA 11A - Medium- and High-Expansion Foam Systems
- NFPA 12 - Carbon Dioxide Extinguishing Systems
- NFPA 12A - Halon 1301 Fire Extinguishing Systems
- NFPA 13 - Standard for Installation of Sprinkler Systems
- NFPA 13D - Standard for Installation of Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes
- NFPA 13R - Standard for Installation of Sprinkler Systems in Residential Occupancies Up to and Including Four Stories in Height
- NFPA 14 - Standard for the Installation of Standpipe and Hose Systems
- NFPA 15 - Water Spray Fixed Systems for Fire Protection
- NFPA 16 - Standard for Installation of Foam-Water Sprinkler and Foam-Water Spray Systems
- NFPA 17 - Standard for Dry Chemical Extinguishing Systems
- NFPA 17A - Standard for Wet Chemical Extinguishing Systems
- NFPA 20 - Standard for Installation of Stationary Pumps for Fire Protection
- NFPA 22 - Standard for Water Tanks for Private Fire Protection
- NFPA 24 - Standard for Installation of Private Fire Service Mains and their Appurtenances
- NFPA 25 - Standard for Inspection, Testing and Maintenance of Water-Based Fire Protection Systems
- NFPA 30 - Flammable and Combustible Liquids Code
- NFPA 30A - Code for Motor Fuel-Dispensing Facilities and Repair Garages
- NFPA 30B - Code for Manufacture and Storage of Aerosol Products
- NFPA 31 - Installation of Oil-Burning Equipment
- NFPA 32 - Standard for Dry-Cleaning Plants
- NFPA 33 - Standard for Spray Application Using Flammable or Combustible Materials
- NFPA 34 - Dipping and Coating Processes Using Flammable or Combustible Liquids
- NFPA 35 - Manufacture of Organic Coatings
- NFPA 40 - Storage and Handling of Cellulose Nitrate Motion Picture Film
- NFPA 50 - Bulk Oxygen Systems at Consumer Sites
- NFPA 50A - Gaseous Hydrogen Systems at Consumer Sites
- NFPA 50B - Liquefied Hydrogen Systems at Consumer Sites
- NFPA 51 - Standard for the Design and Installation of Oxygen-Fuel Gas Systems for Welding, Cutting, and Allied Processes
- NFPA 51A - Acetylene Cylinder Charging Plants
- NFPA 52 -Compressed Natural Gas (CNG) Vehicular Fuel Systems
- NFPA 57 - Liquefied Natural Gas (LNG) Vehicular Fuel Systems
- NFPA 58 - Liquefied Petroleum Gas Code
- NFPA 59A - Production, Storage and Handling of Liquefied Natural Gas (LNG)
- NFPA 61 - Standard for the Prevention of Fires and Dust Explosions in Agricultural and Food Processing Facilities
- NFPA 69 - Standard on Explosion Prevention Systems
- NFPA 72 - National Fire Alarm Code
- NFPA 80 - Fire Doors and Fire Windows
- NFPA 85 - Boiler and Combustion System Hazards Code
- NFPA 86 -Standard for Ovens and Furnaces
- NFPA 99 - Standard for Health Care Facilities
- NFPA 101 - Life Safety Code
- NFPA 111 - Standard on Stored Electrical Energy Emergency and Standby Power Systems
- NFPA 120 - Standard for Fire Prevention and Control in Coal Mines
- NFPA 160 - Flame Special Effects Before an Audience
- NFPA 211 - Standard for Chimneys, Fireplaces, Vents and Solid Fuel-Burning Appliances
- NFPA 230 - Standard for the Fire Protection of Storage
- NFPA 241 - Standard for Safeguarding Construction, Alteration, and Demolition Operations
- NFPA 260 - Standard Methods of Tests and Classification System for Cigarette Ignition Resistance of Components of Upholstered Furniture
- NFPA 261 - Standard Method of Test for Determining Resistance of Mock-Up Upholstered Furniture Material Assemblies to Ignition by Smoldering Cigarettes
- NFPA 265 - Standard Method of Fire Tests for Evaluating Room Fire Growth Contribution of Textile Wall Coverings
- NFPA 266 - Method of Test for Fire Characteristics of Upholstered Furniture Exposed to Flaming Ignition Source
- NFPA 286 - Methods for Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth
- NFPA 385 - Tank Vehicles for Flammable and Combustible Liquids
- NFPA 407 - Aircraft Fuel Servicing
- NFPA 430 - Code for the Storage of Liquid and Solid Oxidizers
- NFPA 484 - Standard for Combustible Metals, Metal Powders, and Metal Dusts
- NFPA 490 - Code for the Storage of Ammonium Nitrate
- NFPA 495 - Explosive Materials Code
- NFPA 498 - Safe Havens and Interchange Lots for Vehicles Transporting Explosives
- NFPA 505 - Fire Safety Standard for Powered Industrial Trucks, Including Type Designations, Areas of Use, Maintenance, and Operation
- NFPA 654 - Standard for the Prevention of Fire and Dust Explosions from the Manufacturing, Processing and Handling of Combustible Particulate Solids
- NFPA 655 - Prevention of Sulfur Fires and Explosions
- NFPA 664 - Standard on the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities
- NFPA 701 -Standard Methods of Fire Tests for Flame-Propagation of Textiles and Films
- NFPA 703 -Fire Retardant Impregnated Wood and Fire Retardant Coatings for Building Materials
- NFPA 704 - Standard System for the Identification of the Hazards of Materials for Emergency Response
- NFPA 750 - Standard on Water Mist Fire Protection Systems
- NFPA 1122 - Color for Model Rocketry
- NFPA 1123 - Code for Fireworks Display
- NFPA 1124 - Code for the Manufacture, Transportation, and Storage of Fireworks and Pyrotechnic Articles
- NFPA 1125 - Manufacture of Model Rocket and High Power Rocket Motors
- NFPA 1126 - Standard for the Use of Pyrotechnics before a Proximate Audience
- NFPA 1127 - Code for High Power Rocketry
- NFPA 2001 - Clean Agent Fire Extinguishing Systems
- UL 30 - Metal Safety Cans
- UL 58 - Steel Underground Tanks for Flammable and Combustible Liquids
- UL 197 - Commercial Electric Cooking Appliances
- UL 268 - Smoke Detectors for Fire Protective Signaling Systems
- UL 300 - Fire Testing of Fire Extinguishing Systems for Protection of Restaurant Cooking Areas
- UL 864 - Control Units for Fire Protective Signaling Systems
- UL 900 - Air Filter Unit
- UL 1275 - Flammable Liquid Storage Cabinets
- UL 1316 - Glass-Fiber-Reinforced Plastic Underground Storage Tanks for Petroleum Products, Alcohols, and Alcohol-Gasoline Mixtures
- UL 1975 - Fire Tests for Foamed Plastics Used for Decorative Purpose
- UL 2085 - Insulated Aboveground Tanks for Flammable and Combustible Liquids
- UL 2200 - Stationary Engine Generator Assemblies
- UL 2208 - Solvent Distillation Units
- UL 2245 - Below-Grade Vaults for Flammable Liquid Storage Tanks
|
|
CONSTRUCTION ENGINEERING STANDARDS NEWS
|
|
|