|
DOD D 25 |
Standard Specification for Round Timber Piles |
|
ASTM D 312 |
Standard Specification for Asphalt Used in Roofing |
|
DOD D 312 |
Standard Specification for Asphalt Used in Roofing |
|
ASTM C 207 |
Standard Specification for Hydrated Lime for Masonry Purposes |
|
DOD C 207 |
Standard Specification for Hydrated Lime for Masonry Purposes |
|
ASTM A 996/A 996M REV A |
Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement |
|
ASTM C 62 |
Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale) |
|
DOD C 62 |
Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale) |
|
ASTM C 1314 REV B |
Standard Test Method for Compressive Strength of Masonry Prisms |
|
ASTM D 3462 |
Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules |
|
DOD D 3462 |
Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules |
|
ASTM C 926 |
Standard Specification for Application of Portland Cement-Based Plaster |
|
ANSI 10B |
UL Standard for Safety Fire Tests of Door Assemblies-Ninth Edition; Reprint with Revisions Through and Including 10/05/2001 |
|
DOD 10B |
UL Standard for Safety Fire Tests of Door Assemblies-Ninth Edition; Reprint with Revisions Through and Including 10/05/2001 |
|
UL 10B |
UL Standard for Safety Fire Tests of Door Assemblies-Ninth Edition; Reprint with Revisions Through and Including 10/05/2001 |
|
ANSI 1479 |
UL Standard for Safety Fire Tests of Through-Penetration Firestops-Third Edition; Reprint with Revisions Through and Including April 6, 2007 |
|
DOD 1479 |
UL Standard for Safety Fire Tests of Through-Penetration Firestops-Third Edition; Reprint with Revisions Through and Including April 6, 2007 |
|
UL 1479 |
UL Standard for Safety Fire Tests of Through-Penetration Firestops-Third Edition; Reprint with Revisions Through and Including April 6, 2007 |
|
ANSI Z97.1 |
Safety Glazing Materials Used in Buildings – Safety Performance Specifications and Methods of Test |
|
DOD Z97.1 |
Safety Glazing Materials Used in Buildings – Safety Performance Specifications and Methods of Test |
|
ANSI 40 |
Standard for the Storage and Handling of Cellulose Nitrate Film-2007 Edition |
|
NFPA 40 |
Standard for the Storage and Handling of Cellulose Nitrate Film-2007 Edition |
|
ANSI A156.19 |
Power Assist and Low Energy Power Operated Doors |
|
BHMA A156.19 |
Power Assist and Low Energy Power Operated Doors |
|
DOD A156.19 |
Power Assist and Low Energy Power Operated Doors |
|
ASTM D 41 |
Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing-E-1; AASHTO No.: M116 |
|
DOD D 41 |
Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing-E-1; AASHTO No.: M116 |
|
ANSI E 736 |
Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members |
|
ASTM E 736 |
Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members |
|
DOD E 736 |
Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members |
|
ANSI 32 |
Standard for Drycleaning Plants-2007 Edition |
|
DOD 32 |
Standard for Drycleaning Plants-2007 Edition |
|
NFPA 32 |
Standard for Drycleaning Plants-2007 Edition |
|
ASTM G 152 |
Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
|
NFPA 120 |
Standard for Fire Prevention and Control in Coal Mines |
|
ACI 216.1 |
Standard Method for Determining Fire Resistance of Concrete and Masonry Construction Assemblies |
|
UL 268 |
UL Standard for Safety Smoke Detectors for Fire Alarm Signaling Systems-Fifth Edition |
|
ASTM C 1002 |
Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs |
|
DOD C 1002 |
Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs |
|
ANSI 259 |
Standard Test Method for Potential Heat of Building Materials |
|
NFPA 259 |
Standard Test Method for Potential Heat of Building Materials |
|
ASTM C 1329 |
Standard Specification for Mortar Cement |
|
ASTM C 473 REV A |
Standard Test Methods for Physical Testing of Gypsum Panel Products |
|
ASCE 32-01 |
Design and Construction of Frost-Protected Shallow Foundations |
|
DOD 580 |
UL Standard for Safety Tests for Uplift Resistance of Roof Assemblies-Fifth Edition |
|
UL 580 |
UL Standard for Safety Tests for Uplift Resistance of Roof Assemblies-Fifth Edition |
|
ASCE 8-02 |
Specification for the Design of Cold-Formed Stainless Steel Structural Members |
|
ASTM C 1063 |
Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster |
|
DOD C 1063 |
Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster |
|
ANSI 257 |
Standard on Fire Test for Window and Glass Block Assemblies-2007 Edition |
|
NFPA 257 |
Standard on Fire Test for Window and Glass Block Assemblies-2007 Edition |
|
ANSI 664 |
Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities-2007 Edition |
|
NFPA 664 |
Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities-2007 Edition |
|
ASTM C 615 |
Standard Specification for Granite Dimension Stone |
|
DOD C 615 |
Standard Specification for Granite Dimension Stone |
|
ASTM E 681 |
Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases) |
|
ASTM C 847 |
Standard Specification for Metal Lath |
|
DOD C 847 |
Standard Specification for Metal Lath |
|
ASTM C 954 |
Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs From 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness |
|
DOD C 954 |
Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs From 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness |
|
ANSI 102 |
Standard for Grandstands, Folding and Telescopic Seating, Tents, and Membrane Structures |
|
DOD 102 |
Standard for Grandstands, Folding and Telescopic Seating, Tents, and Membrane Structures |
|
NFPA 102 |
Standard for Grandstands, Folding and Telescopic Seating, Tents, and Membrane Structures |
|
ANSI A156.10 |
Power Operated Pedestrian Doors |
|
BHMA A156.10 |
Power Operated Pedestrian Doors |
|
DOD A156.10 |
Power Operated Pedestrian Doors |
|
ASTM C 331 |
Standard Specification for Lightweight Aggregates for Concrete Masonry Units |
|
DOD C 331 |
Standard Specification for Lightweight Aggregates for Concrete Masonry Units |
|
ASTM C 36/C 36M |
Standard Specification for Gypsum Wallboard-No Replacement |
|
ASTM C 475/C 475M |
Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board |
|
DOD C 475/C 475M |
Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board |
|
ASTM A 951/A 951M |
Standard Specification for Steel Wire for Masonry Joint Reinforcement |
|
ANSI 250 |
Enclosures for Electrical Equipment (1000 Volts Maximum) |
|
DOD 250 |
Enclosures for Electrical Equipment (1000 Volts Maximum) |
|
NEMA 250 |
Enclosures for Electrical Equipment (1000 Volts Maximum) |
|
ANSI 253 |
Standard Method of Test for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source-2006 Edition |
|
NFPA 253 |
Standard Method of Test for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source-2006 Edition |
|
ASTM A 875/A 875M |
Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process |
|
ANSI A90.1 |
Safety Standard for Belt Manlifts |
|
ASME A90.1 |
Safety Standard for Belt Manlifts |
|
ASTM C 27 |
Standard Classification of Fireclay and High-Alumina Refractory Brick |
|
DOD C 27 |
Standard Classification of Fireclay and High-Alumina Refractory Brick |
|
ASTM D 4829 |
Standard Test Method for Expansion Index of Soils |
|
ANSI TIA-570-B |
Residential Telecommunications Infrastructure Standard |
|
DOD TIA-570-B |
Residential Telecommunications Infrastructure Standard |
|
EIA TIA-570-B |
Residential Telecommunications Infrastructure Standard |
|
TIA TIA-570-B |
Residential Telecommunications Infrastructure Standard |
|
ASTM D 4586 |
Standard Specification for Asphalt Roof Cement, Asbestos-Free |
|
DOD D 4586 |
Standard Specification for Asphalt Roof Cement, Asbestos-Free |
|
ASCE 24-05 |
Flood Resistant Design and Construction |
|
ASTM C 845 |
Standard Specification for Expansive Hydraulic Cement |
|
ASCE 16-95 |
Standard for Load and Resistance Factor Design (LRFD) for Engineered Wood Construction |
|
ASTM C 549 |
Standard Specification for Perlite Loose Fill Insulation |
|
DOD C 549 |
Standard Specification for Perlite Loose Fill Insulation |
|
ASTM C 836 |
Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course |
|
DOD C 836 |
Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course |
|
ASTM D 1227 |
Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing |
|
DOD D 1227 |
Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing |
|
ASTM D 3689 |
Standard Test Method for Individual Piles under Static Axial Tensile Load-No Replacement |
|
ASTM C 568 |
Standard Specification for Limestone Dimension Stone |
|
DOD C 568 |
Standard Specification for Limestone Dimension Stone |
|
ASTM C 652 REV A |
Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale) |
|
DOD C 652 REV A |
Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale) |
|
ANSI 285 |
Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components-2006 Edition |
|
NFPA 285 |
Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components-2006 Edition |
|
ASTM C 1029 REV A |
Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation |
|
DOD C 1029 REV A |
Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation |
|
ASTM D 4434 |
Standard Specification for Poly(Vinyl Chloride) Sheet Roofing |
|
DOD D 4434 |
Standard Specification for Poly(Vinyl Chloride) Sheet Roofing |
|
ANSI 265 |
Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile Coverings on Full Height Panels and Walls-2007 Edition |
|
NFPA 265 |
Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile Coverings on Full Height Panels and Walls-2007 Edition |
|
ANSI 268 |
Standard Test Method for Determining Ignitibility of Exterior Wall Assemblies Using a Radiant Heat Energy Source-2007 Edition |
|
NFPA 268 |
Standard Test Method for Determining Ignitibility of Exterior Wall Assemblies Using a Radiant Heat Energy Source-2007 Edition |
|
ASTM A 755/A 755M |
Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products |
|
DOD A 755/A 755M |
Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products |
|
ASTM C 841 |
Standard Specification for Installation of Interior Lathing and Furring |
|
DOD C 841 |
Standard Specification for Installation of Interior Lathing and Furring |
|
ASTM D 1761 |
Standard Test Methods for Mechanical Fasteners in Wood |
|
DOD D 1761 |
Standard Test Methods for Mechanical Fasteners in Wood |
|
ANSI 790 |
UL Standard for Safety for Standard Test Methods for Fire Tests of Roof Coverings-Eighth Edition |
|
DOD 790 |
UL Standard for Safety for Standard Test Methods for Fire Tests of Roof Coverings-Eighth Edition |
|
UL 790 |
UL Standard for Safety for Standard Test Methods for Fire Tests of Roof Coverings-Eighth Edition |
|
ASTM C 1186 |
Standard Specification for Flat Non-Asbestos Fiber-Cement Sheets |
|
ASTM D 3737 |
Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
|
ANSI 2079 |
UL Standard for Safety for Tests for Fire Resistance of Building Joint Systems-Fourth Edition; Reprint with Revisions through and Including 3/10/2006 |
|
UL 2079 |
UL Standard for Safety for Tests for Fire Resistance of Building Joint Systems-Fourth Edition; Reprint with Revisions through and Including 3/10/2006 |
|
ASTM C 516 |
Standard Specification for Vermiculite Loose Fill Thermal Insulation |
|
DOD C 516 |
Standard Specification for Vermiculite Loose Fill Thermal Insulation |
|
ASTM D 2822 |
Standard Specification for Asphalt Roof Cement, Asbestos-Containing |
|
DOD D 2822 |
Standard Specification for Asphalt Roof Cement, Asbestos-Containing |
|
ASTM D 4479 |
Standard Specification for Asphalt Roof Coatings—Asbestos-Free |
|
DOD D 4479 |
Standard Specification for Asphalt Roof Coatings—Asbestos-Free |
|
ANSI 10C |
UL Standard for Safety Positive Pressure Fire Tests of Door Assemblies-First Edition; Reprint with Revisions Through and Including 11/02/2001 |
|
UL 10C |
UL Standard for Safety Positive Pressure Fire Tests of Door Assemblies-First Edition; Reprint with Revisions Through and Including 11/02/2001 |
|
ASTM C 897 |
Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters |
|
ASTM D 1970 |
Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection |
|
ASTM D 450 |
Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing |
|
DOD D 450 |
Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing |
|
AA ASM35 |
Specifications for Aluminum Sheet Metal Work in Building Construction Construction Manual Series Section 5-Fourth Edition |
|
DOD ASM35 |
Specifications for Aluminum Sheet Metal Work in Building Construction Construction Manual Series Section 5-Fourth Edition |
|
ASTM C 557 |
Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
|
DOD C 557 |
Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
|
ASTM D 2178 |
Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing |
|
DOD D 2178 |
Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing |
|
ANSI 1256 |
UL Standard for Safety Fire Test of Roof Deck Constructions-Fourth Edition; Reprint with Revisions Through and Including January 12,2007 |
|
DOD 1256 |
UL Standard for Safety Fire Test of Roof Deck Constructions-Fourth Edition; Reprint with Revisions Through and Including January 12,2007 |
|
UL 1256 |
UL Standard for Safety Fire Test of Roof Deck Constructions-Fourth Edition; Reprint with Revisions Through and Including January 12,2007 |
|
DOD 250 |
Enclosures for Electrical Equipment (1000 Volts Maximum) |
|
NEMA 250 |
Enclosures for Electrical Equipment (1000 Volts Maximum) |
|
ASTM C 1177/C 1177M |
Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing |
|
ASTM C 22/C 22M |
Standard Specification for Gypsum |
|
ASTM C 28/C 28M |
Standard Specification for Gypsum Plasters |
|
DOD C 28/C 28M |
Standard Specification for Gypsum Plasters |
|
ASTM C 5 |
Standard Specification for Quicklime for Structural Purposes |
|
DOD C 5 |
Standard Specification for Quicklime for Structural Purposes |
|
ASTM C 503 |
Standard Specification for Marble Dimension Stone |
|
ASTM F 547 |
Standard Terminology of Nails for Use with Wood and Wood-Base Materials |
|
ASTM C 206 |
Standard Specification for Finishing Hydrated Lime |
|
DOD C 206 |
Standard Specification for Finishing Hydrated Lime |
|
ASTM C 34 |
Standard Specification for Structural Clay Load-Bearing Wall Tile |
|
DOD C 34 |
Standard Specification for Structural Clay Load-Bearing Wall Tile |
|
ASTM C 472 |
Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete |
|
DOD C 472 |
Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete |
|
ASTM D 4869 |
Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing |
|
ASTM D 6083 |
Standard Specification for Liquid Applied Acrylic Coating Used in Roofing |
|
DOD 10A |
UL Standard for Safety Tin-Clad Fire Doors-Twentieth Edition; Reprint with Revisions Through and Including 03/21/2003 |
|
UL 10A |
UL Standard for Safety Tin-Clad Fire Doors-Twentieth Edition; Reprint with Revisions Through and Including 03/21/2003 |
|
ASTM C 957 |
Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface |
|
ANSI D 3679 |
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding |
|
ASTM D 3679 |
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding |
|
ASTM E 492 |
Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine |
|
ASCE 19-96 |
Standard Guidelines for the Structural Applications of Steel Cables for Buildings |
|
ASTM C 406 |
Standard Specification for Roofing Slate |
|
ASTM C 616 |
Standard Specification for Quartz-Based Dimension Stone |
|
DOD C 616 |
Standard Specification for Quartz-Based Dimension Stone |
|
ASTM C 744 |
Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units |
|
DOD C 744 |
Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units |
|
ASTM C 1280 |
Standard Specification for Application of Gypsum Sheathing |
|
ASTM D 1863 |
Standard Specification for Mineral Aggregate Used on Built-Up Roofs |
|
DOD D 1863 |
Standard Specification for Mineral Aggregate Used on Built-Up Roofs |
|
ASTM D 2626 |
Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing |
|
DOD D 2626 |
Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing |
|
ANSI 1784 |
UL Standard for Safety Air Leakage Tests of Door Assemblies-Third Edition; Revisions through and including December 17,2004 |
|
UL 1784 |
UL Standard for Safety Air Leakage Tests of Door Assemblies-Third Edition; Revisions through and including December 17,2004 |
|
ASTM B 101 |
Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction |
|
DOD B 101 |
Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction |
|
ASTM C 1047 |
Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base |
|
DOD C 1047 |
Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base |
|
ASTM C 1178/C 1178M |
Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel |
|
ASTM C 35 |
Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster |
|
DOD C 35 |
Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster |
|
ASTM C 59/C 59M |
Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster |
|
DOD C 59/C 59M |
Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster |
|
ASTM C 73 |
Standard Specification for Calcium Silicate Brick (Sand-Lime Brick) |
|
DOD C 73 |
Standard Specification for Calcium Silicate Brick (Sand-Lime Brick) |
|
ASTM C 932 |
Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering |
|
DOD C 932 |
Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering |
|
ASTM D 4637 |
Standard Specification for EPDM Sheet Used in Single-Ply Roof Membrane |
|
DOD D 4637 |
Standard Specification for EPDM Sheet Used in Single-Ply Roof Membrane |
|
ASTM D 5019 |
Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane |
|
ASTM C 1278/C 1278M |
Standard Specification for Fiber-Reinforced Gypsum Panel |
|
ASTM C 61/C 61M |
Standard Specification for Gypsum Keene´s Cement |
|
DOD C 61/C 61M |
Standard Specification for Gypsum Keene´s Cement |
|
ASTM C 629 |
Standard Specification for Slate Dimension Stone |
|
DOD C 629 |
Standard Specification for Slate Dimension Stone |
|
ASTM C 946 |
Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls |
|
ASTM D 4022 |
Standard Specification for Coal Tar Roof Cement, Asbestos Containing |
|
DOD D 4022 |
Standard Specification for Coal Tar Roof Cement, Asbestos Containing |
|
ANSI E 970 |
Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source |
|
ASTM E 970 |
Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source |
|
ASTM D 4272 |
Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop |
|
ANSI 14B |
UL Standard for Sliding Hardware for Standard, Horizontally Mounted Tin-Clad Fire Doors-Eighth Edition; Reprint with Revisions Through and Including July 14, 2000 |
|
DOD 14B |
UL Standard for Sliding Hardware for Standard, Horizontally Mounted Tin-Clad Fire Doors-Eighth Edition; Reprint with Revisions Through and Including July 14, 2000 |
|
UL 14B |
UL Standard for Sliding Hardware for Standard, Horizontally Mounted Tin-Clad Fire Doors-Eighth Edition; Reprint with Revisions Through and Including July 14, 2000 |
|
ANSI 300 |
UL Standard for Safety for Fire Testing of Fire Extinguishing Systems for Protection of Commercial Cooking Equipment-Third Edition |
|
UL 300 |
UL Standard for Safety for Fire Testing of Fire Extinguishing Systems for Protection of Commercial Cooking Equipment-Third Edition |
|
ASTM D 43 |
Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing,and Waterproofing-AASHTO No.: M121 |
|
DOD D 43 |
Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing,and Waterproofing-AASHTO No.: M121 |
|
ASTM G 26 |
Standard Practice for Operating Light-Exposure Apparatus (Xenon-Arc Type) with and without Water for Exposure of Nonmetallic Materials-(Discontinued 2000; Replaced by G155) |
|
DOD G 26 |
Standard Practice for Operating Light-Exposure Apparatus (Xenon-Arc Type) with and without Water for Exposure of Nonmetallic Materials-(Discontinued 2000; Replaced by G155) |
|
ANSI A112.19.13 |
Electrohydraulic Water Closets |
|
ASME A112.19.13 |
Electrohydraulic Water Closets |
|
ASTM C 317/C 317M |
Standard Specification for Gypsum Concrete |
|
DOD C 317/C 317M |
Standard Specification for Gypsum Concrete |
|
ASTM C 631 REV A |
Standard Specification for Bonding Compounds for Interior Gypsum Plastering |
|
ASTM D 3468 |
Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing |
|
ASTM D 5055 |
Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
|
ASTM D 5516 |
Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures |
|
ASTM C 1167 |
Standard Specification for Clay Roof Tiles |
|
ASTM C 199 |
Standard Test Method for Pier Test for Refractory Mortars |
|
DOD C 199 |
Standard Test Method for Pier Test for Refractory Mortars |
|
ASTM C 474 |
Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction |
|
ASTM C 514 |
Standard Specification for Nails for the Application of Gypsum Board |
|
DOD C 514 |
Standard Specification for Nails for the Application of Gypsum Board |
|
ASTM C 56 |
Standard Specification for Structural Clay Nonloadbearing Tile |
|
DOD C 56 |
Standard Specification for Structural Clay Nonloadbearing Tile |
|
ANSI C 843 |
Standard Specification for Application of Gypsum Veneer Plaster |
|
ASTM C 843 |
Standard Specification for Application of Gypsum Veneer Plaster |
|
DOD C 843 |
Standard Specification for Application of Gypsum Veneer Plaster |
|
ASTM C 933 |
Standard Specification for Welded Wire Lath |
|
ASTM D 3746 |
Standard Test Method for Impact Resistance of Bituminous Roofing Systems |
|
ASTM D 5643 |
Standard Specification for Coal Tar Roof Cement, Asbestos Free |
|
ASTM D 6164 |
Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements |
|
ANSI 1715 |
UL Standard for Safety Fire Test of Interior Finish Material-Third Edition; Reprint with Revisions Through and Including March 19, 2004 |
|
UL 1715 |
UL Standard for Safety Fire Test of Interior Finish Material-Third Edition; Reprint with Revisions Through and Including March 19, 2004 |
|
ASTM C 587 |
Standard Specification for Gypsum Veneer Plaster |
|
DOD C 587 |
Standard Specification for Gypsum Veneer Plaster |
|
ASTM C 588/C 588M |
Standard Specification for Gypsum Base for Veneer Plasters |
|
DOD C 588/C 588M |
Standard Specification for Gypsum Base for Veneer Plasters |
|
ASTM C 842 |
Standard Specification for Application of Interior Gypsum Plaster |
|
ASTM C 844 |
Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster |
|
DOD C 844 |
Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster |
|
DOD 103 |
UL Standard for Safety Factory-Built Chimneys for Residential Type and Building Heating Appliances-Tenth Edition; Reprinted with Revisions Through and Including June 30, 2006 |
|
UL 103 |
UL Standard for Safety Factory-Built Chimneys for Residential Type and Building Heating Appliances-Tenth Edition; Reprinted with Revisions Through and Including June 30, 2006 |
|
ANSI 1040 |
UL Standard for Safety Fire Test of Insulated Wall Construction-First Edition; Reprint with Revisions Through and Including June 8, 2001 |
|
UL 1040 |
UL Standard for Safety Fire Test of Insulated Wall Construction-First Edition; Reprint with Revisions Through and Including June 8, 2001 |
|
ANSI 127 |
UL Standard for Safety Factory-Built Fireplaces-Seventh Edition; Reprint with Revisions Through and Including Novemberb 10, 2006 |
|
UL 127 |
UL Standard for Safety Factory-Built Fireplaces-Seventh Edition; Reprint with Revisions Through and Including Novemberb 10, 2006 |
|
ASTM C 1032 |
Standard Specification for Woven Wire Plaster Base |
|
ASTM D 227 |
Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing |
|
DOD D 227 |
Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing |
|
ANSI D 3679 REV A |
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding |
|
ASTM D 3679 REV A |
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding |
|
ASTM D 4897 |
Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing |
|
DOD D 4897 |
Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing |
|
ANSI D 5664 |
Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber |
|
ASTM D 5664 |
Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber |
|
ASTM G 23 |
Standard Practice for Operating Light-Exposure Apparatus (Carbon-Arc Type) with and without Water for Exposure of Nonmetallic Materials-(Discontinued 2000; Replaced by G152 and G153) |
|
ACI T1.1 |
Acceptance Criteria for Moment Frames Based on Structural Testing-Supersedes ITG/T1.1-1999 |
|
ACI T1.1R |
Commentary on Acceptance Criteria for Moment Frames Based on Structural Testing-Supersedes ITG/T1.1R-1999 |
|
DOD 14C |
UL Standard for Safety Swinging Hardware for Standard Tin-Clad Fire Doors Mounted Singly and in Pairs-Eighth Edition |
|
UL 14C |
UL Standard for Safety Swinging Hardware for Standard Tin-Clad Fire Doors Mounted Singly and in Pairs-Eighth Edition |
|
ASTM C 1261 |
Standard Specification for Firebox Brick for Residential Fireplaces |
|
ASTM G 53 |
Standard Practice for Operating Light-and Water-Exposure Apparatus (Fluorescent UV-Condensation Type) for Exposure of Nonmetallic Materials-(Discontinued 2000; Replaced by ASTM G154 Rev A) |
|
ASTM C 212 |
Standard Specification for Structural Clay Facing Tile |
|
DOD C 212 |
Standard Specification for Structural Clay Facing Tile |
|
ASTM C 887 |
Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar |
|
ASTM D 3747 |
Standard Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation |
|
ASTM D 5726 |
Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing |
|
ANSI E 1602 |
Standard Guide for Construction of Solid Fuel Burning Masonry Heaters |
|
ASTM E 1602 |
Standard Guide for Construction of Solid Fuel Burning Masonry Heaters |
|
UL 1975 |
UL Standard for Safety Fire Tests for Foamed Plastics Used for Decorative Purposes-Third Edition |
|
ASTM C 956 |
Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete |
|
ASTM D 5665 REV A |
Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing |
|
ASTM D 6162 REV A |
Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements |
|
ASTM D 6163 |
Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements |
|
ANSI 1897 |
UL Standard for Safety Uplift Tests for Roof Covering Systems-Fifth Edition |
|
UL 1897 |
UL Standard for Safety Uplift Tests for Roof Covering Systems-Fifth Edition |
|
ANSI 641 |
UL Standard for Safety Type L Low-Temperature Venting Systems-Seventh Edition; Reprint with Revisions Through and Including August 12, 2005 |
|
UL 641 |
UL Standard for Safety Type L Low-Temperature Venting Systems-Seventh Edition; Reprint with Revisions Through and Including August 12, 2005 |
|
ASTM D 2823 |
Standard Specification for Asphalt Roof Coatings, Asbestos-Containing |
|
DOD D 2823 |
Standard Specification for Asphalt Roof Coatings, Asbestos-Containing |
|
ASTM D 3909 REV B |
Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced with Mineral Granules |
|
DOD D 3909 REV B |
Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced with Mineral Granules |
|
ASTM D 6298 |
Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface |
|
ASTM D 6305 |
Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing |
|
ASTM A 616/A 616M REV A |
Standard Specification for Rail-Steel Deformed and Plain Bars for Concrete Reinforcement-(Discontinued 1999; Replaced by A996/A996M) |
|
DOD A 616/A 616M REV A |
Standard Specification for Rail-Steel Deformed and Plain Bars for Concrete Reinforcement-(Discontinued 1999; Replaced by A996/A996M) |
|
ASTM A 617/A 617M REV A |
Standard Specification for Axle-Steel Deformed and Plain Bars for Concrete Reinforcement-(Discontinued 1999; Replaced by A996/A996M) |
|
DOD A 617/A 617M REV A |
Standard Specification for Axle-Steel Deformed and Plain Bars for Concrete Reinforcement-(Discontinued 1999; Replaced by A996/A996M) |