|
ANSI B31.3 |
Process Piping |
|
ASME B31.3 |
Process Piping |
|
DOD B31.3 |
Process Piping |
|
ASME B31.1 ADD B |
Power Piping |
|
DOD B31.1 ADD B |
Power Piping |
|
AWS D1.1/D1.1M ERTA 1 AND 2 |
Structural Welding Code - Steel-20th Edition |
|
DOD D1.1/D1.1M ERTA 1 AND 2 |
Structural Welding Code - Steel-20th Edition |
|
ASME B31.8 |
Gas Transmission and Distribution Piping Systems |
|
DOD B31.8 |
Gas Transmission and Distribution Piping Systems |
|
ANSI 30 |
Flammable and Combustible Liquids Code-Errata 30-03-01: 08/13/2004; Errata 30-03-2:04/18/2006 |
|
DOD 30 |
Flammable and Combustible Liquids Code-Errata 30-03-01: 08/13/2004; Errata 30-03-2:04/18/2006 |
|
NFPA 30 |
Flammable and Combustible Liquids Code-Errata 30-03-01: 08/13/2004; Errata 30-03-2:04/18/2006 |
|
ASTM B 209 |
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
|
DOD B 209 |
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
|
ANSI 13 |
Standard for the Installation of Sprinkler Systems-2007 Edition |
|
DOD 13 |
Standard for the Installation of Sprinkler Systems-2007 Edition |
|
NFPA 13 |
Standard for the Installation of Sprinkler Systems-2007 Edition |
|
ANSI B31.4 |
Pipeline Transportation Systems for Liquid Hydrocarbons and other Liquids |
|
ASME B31.4 |
Pipeline Transportation Systems for Liquid Hydrocarbons and other Liquids |
|
DOD B31.4 |
Pipeline Transportation Systems for Liquid Hydrocarbons and other Liquids |
|
ANSI 101 |
Life Safety Code-2006 Edition; Errata 06-1:03/01/2006; TIA 06-2:08/19/2006; TIA 06-3:08/19/2006 |
|
DOD 101 |
Life Safety Code-2006 Edition; Errata 06-1:03/01/2006; TIA 06-2:08/19/2006; TIA 06-3:08/19/2006 |
|
NFPA 101 |
Life Safety Code-2006 Edition; Errata 06-1:03/01/2006; TIA 06-2:08/19/2006; TIA 06-3:08/19/2006 |
|
ASTM A 6/A 6M |
Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling |
|
DOD A 6/A 6M |
Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling |
|
ACI 318/318R |
Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary (ACI 318R-05)-Errata: 08/11/2005 |
|
DOD 318/318R |
Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary (ACI 318R-05)-Errata: 08/11/2005 |
|
ANSI 72 |
National Fire Alarm Code-2007 Edition |
|
NFPA 72 |
National Fire Alarm Code-2007 Edition |
|
ASCE 7-05 |
Minimum Design Loads for Buildings and Other Structures-Including Supplement 1 |
|
DOD 7-05 |
Minimum Design Loads for Buildings and Other Structures-Including Supplement 1 |
|
ASTM A 307 |
Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength |
|
DOD A 307 |
Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength |
|
ANSI D 93 |
Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester |
|
ASTM D 93 |
Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester |
|
DOD D 93 |
Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester |
|
ASTM C 33 |
Standard Specification for Concrete Aggregates |
|
DOD C 33 |
Standard Specification for Concrete Aggregates |
|
ASTM A 123/A 123M |
Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
|
DOD A 123/A 123M |
Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
|
ASME A17.1 |
Safety Code for Elevators and Escalators Includes Requirements for Elevators, Escalators, Dumbwaiters, Moving Walks, Material Lifts, and Dumbwaiters With Automatic Transfer Devices |
|
DOD A17.1 |
Safety Code for Elevators and Escalators Includes Requirements for Elevators, Escalators, Dumbwaiters, Moving Walks, Material Lifts, and Dumbwaiters With Automatic Transfer Devices |
|
ANSI 11 |
Standard for Low-, Medium-, and High-Expansion Foam-TIA 05-1:04/10/2006 |
|
DOD 11 |
Standard for Low-, Medium-, and High-Expansion Foam-TIA 05-1:04/10/2006 |
|
NFPA 11 |
Standard for Low-, Medium-, and High-Expansion Foam-TIA 05-1:04/10/2006 |
|
ASTM A 588/A 588M |
Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance-AASHTO No.: M 222 |
|
DOD A 588/A 588M |
Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance-AASHTO No.: M 222 |
|
ASTM A 153/A 153M |
Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware-AASHTO No.: M232 |
|
DOD A 153/A 153M |
Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware-AASHTO No.: M232 |
|
ASTM A 167 |
Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
|
DOD A 167 |
Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
|
DOD 250 |
Enclosures for Electrical Equipment (1000 Volts Maximum) |
|
NEMA 250 |
Enclosures for Electrical Equipment (1000 Volts Maximum) |
|
ANSI 14 |
Standard for the Installation of Standpipe and Hose Systems-2007 Edition |
|
DOD 14 |
Standard for the Installation of Standpipe and Hose Systems-2007 Edition |
|
NFPA 14 |
Standard for the Installation of Standpipe and Hose Systems-2007 Edition |
|
ASME B31.5 |
Refrigeration Piping and Heat Transfer Components-Addenda: 2004 |
|
DOD B31.5 |
Refrigeration Piping and Heat Transfer Components-Addenda: 2004 |
|
ANSI 110 |
Standard for Emergency and Standby Power Systems |
|
NFPA 110 |
Standard for Emergency and Standby Power Systems |
|
ASTM A 568/A 568M REV A |
Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
|
DOD A 568/A 568M REV A |
Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
|
ASTM D 1557 |
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)) |
|
DOD D 1557 |
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)) |
|
ANSI B31.8S |
Managing System Integrity of Gas Pipelines-Supplement to ASME B31.8 |
|
ASME B31.8S |
Managing System Integrity of Gas Pipelines-Supplement to ASME B31.8 |
|
DOD B31.8S |
Managing System Integrity of Gas Pipelines-Supplement to ASME B31.8 |
|
ANSI A13.1 |
Scheme for the Identification of Piping Systems |
|
ASME A13.1 |
Scheme for the Identification of Piping Systems |
|
DOD A13.1 |
Scheme for the Identification of Piping Systems |
|
ASTM A 420/A 420M |
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service |
|
ASTM A 283/A 283M |
Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates |
|
DOD A 283/A 283M |
Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates |
|
ASTM B 88 |
Standard Specification for Seamless Copper Water Tube |
|
DOD B 88 |
Standard Specification for Seamless Copper Water Tube |
|
ANSI 12 |
Standard on Carbon Dioxide Extinguishing Systems-Errata 05-1 05/05/2005; Errata 05-2 05/27/2005; TIA 05-1:11/18/2005; TIA 05-2:08/19/2006 |
|
DOD 12 |
Standard on Carbon Dioxide Extinguishing Systems-Errata 05-1 05/05/2005; Errata 05-2 05/27/2005; TIA 05-1:11/18/2005; TIA 05-2:08/19/2006 |
|
NFPA 12 |
Standard on Carbon Dioxide Extinguishing Systems-Errata 05-1 05/05/2005; Errata 05-2 05/27/2005; TIA 05-1:11/18/2005; TIA 05-2:08/19/2006 |
|
ANSI 80 |
Standard for Fire Doors and Other Opening Protectives-2007 Edition |
|
DOD 80 |
Standard for Fire Doors and Other Opening Protectives-2007 Edition |
|
NFPA 80 |
Standard for Fire Doors and Other Opening Protectives-2007 Edition |
|
ANSI D 92 REV A |
Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester-IP Designation: 36/84 (89); AASHTO No.: T48; DIN 51 376 |
|
ASTM D 92 REV A |
Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester-IP Designation: 36/84 (89); AASHTO No.: T48; DIN 51 376 |
|
DOD D 92 REV A |
Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester-IP Designation: 36/84 (89); AASHTO No.: T48; DIN 51 376 |
|
ANSI B16.22 |
Wrought Copper and Copper Alloy Solder Joint Pressure Fittings |
|
ASME B16.22 |
Wrought Copper and Copper Alloy Solder Joint Pressure Fittings |
|
DOD B16.22 |
Wrought Copper and Copper Alloy Solder Joint Pressure Fittings |
|
ANSI 2001 |
Standard for Clean Agent Fire Extinguishing Systems |
|
NFPA 2001 |
Standard for Clean Agent Fire Extinguishing Systems |
|
ANSI D 56 |
Standard Test Method for Flash Point by Tag Closed Cup Tester |
|
ASTM D 56 |
Standard Test Method for Flash Point by Tag Closed Cup Tester |
|
DOD D 56 |
Standard Test Method for Flash Point by Tag Closed Cup Tester |
|
ACI 318M |
Building Code Requirements for Structural Concrete and Commentary (ACI 318M-05)-Errata: 08/11/2005 |
|
ANSI TIA-568-B.1-7 |
Commercial Building Telecommunications Cabling Standard Part 1 - General Requirements Addendum 7 – Guidelines for Maintaining Polarity Using Array Connectors-Addendum 7 |
|
DOD TIA-568-B.1-7 |
Commercial Building Telecommunications Cabling Standard Part 1 - General Requirements Addendum 7 – Guidelines for Maintaining Polarity Using Array Connectors-Addendum 7 |
|
EIA TIA-568-B.1-7 |
Commercial Building Telecommunications Cabling Standard Part 1 - General Requirements Addendum 7 – Guidelines for Maintaining Polarity Using Array Connectors-Addendum 7 |
|
TIA TIA-568-B.1-7 |
Commercial Building Telecommunications Cabling Standard Part 1 - General Requirements Addendum 7 – Guidelines for Maintaining Polarity Using Array Connectors-Addendum 7 |
|
ASTM D 422 |
Standard Test Method for Particle-Size Analysis of Soils |
|
DOD D 422 |
Standard Test Method for Particle-Size Analysis of Soils |
|
ASTM A 706/A 706M REV A |
Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement |
|
DOD A 706/A 706M REV A |
Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement |
|
ANSI TIA-568-B.2-9 |
Commercial Building Telecommunications Cabling Standard Part 2 - Balanced Twisted-Pair Cabling Components Addendum 9 – Additional Category 6 Balance Requirements and Measurement Procedures |
|
DOD TIA-568-B.2-9 |
Commercial Building Telecommunications Cabling Standard Part 2 - Balanced Twisted-Pair Cabling Components Addendum 9 – Additional Category 6 Balance Requirements and Measurement Procedures |
|
EIA TIA-568-B.2-9 |
Commercial Building Telecommunications Cabling Standard Part 2 - Balanced Twisted-Pair Cabling Components Addendum 9 – Additional Category 6 Balance Requirements and Measurement Procedures |
|
TIA TIA-568-B.2-9 |
Commercial Building Telecommunications Cabling Standard Part 2 - Balanced Twisted-Pair Cabling Components Addendum 9 – Additional Category 6 Balance Requirements and Measurement Procedures |
|
ANSI 704 |
Standard System for the Identification of the Hazards of Materials for Emergency Response-2007 Edition |
|
NFPA 704 |
Standard System for the Identification of the Hazards of Materials for Emergency Response-2007 Edition |
|
ACI 530 |
Building Code Requirements for Masonry Structures and Commentary-ASCE 5-05/TMS 402-05 |
|
ASTM C 618 |
Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
|
DOD C 618 |
Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
|
ASTM C 172 |
Standard Practice for Sampling Freshly Mixed Concrete |
|
DOD C 172 |
Standard Practice for Sampling Freshly Mixed Concrete |
|
ASTM A 185/A 185M |
Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete |
|
DOD A 185/A 185M |
Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete |
|
ASTM D 4318 |
Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils |
|
DOD D 4318 |
Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils |
|
ASTM C 90 REV B |
Standard Specification for Loadbearing Concrete Masonry Units |
|
DOD C 90 REV B |
Standard Specification for Loadbearing Concrete Masonry Units |
|
ASTM E 96/E 96M |
Standard Test Methods for Water Vapor Transmission of Materials |
|
DOD E 96/E 96M |
Standard Test Methods for Water Vapor Transmission of Materials |
|
AWS D1.3 ERTA |
Structural Welding Code - Sheet Steel |
|
DOD D1.3 ERTA |
Structural Welding Code - Sheet Steel |
|
ASTM A 510 |
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel |
|
DOD A 510 |
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel |
|
ANSI A 252 |
Standard Specification for Welded and Seamless Steel Pipe Piles |
|
ASTM A 252 |
Standard Specification for Welded and Seamless Steel Pipe Piles |
|
ANSI B16.18 |
Cast Copper Alloy Solder Joint Pressure Fittings |
|
ASME B16.18 |
Cast Copper Alloy Solder Joint Pressure Fittings |
|
DOD B16.18 |
Cast Copper Alloy Solder Joint Pressure Fittings |
|
ASTM A 82/A 82M REV A |
Standard Specification for Steel Wire, Plain, for Concrete Reinforcement-AASHTO Standard AASHTO No. M 32 |
|
DOD A 82/A 82M REV A |
Standard Specification for Steel Wire, Plain, for Concrete Reinforcement-AASHTO Standard AASHTO No. M 32 |
|
ACI 530.1 |
Specification for Masonry Structures-ASCE 6-05/TMS 602-05 |
|
DOD 530.1 |
Specification for Masonry Structures-ASCE 6-05/TMS 602-05 |
|
ASTM C 547 |
Standard Specification for Mineral Fiber Pipe Insulation |
|
DOD C 547 |
Standard Specification for Mineral Fiber Pipe Insulation |
|
ANSI 17 |
Standard for Dry Chemical Extinguishing Systems |
|
DOD 17 |
Standard for Dry Chemical Extinguishing Systems |
|
NFPA 17 |
Standard for Dry Chemical Extinguishing Systems |
|
DOD ICS 6 |
Industrial Control and Systems Enclosures |
|
NEMA ICS 6 |
Industrial Control and Systems Enclosures |
|
ASTM D 2216 |
Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass |
|
DOD D 2216 |
Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass |
|
ASTM A 775/A 775M |
Standard Specification for Epoxy-Coated Steel Reinforcing Bars |
|
DOD A 775/A 775M |
Standard Specification for Epoxy-Coated Steel Reinforcing Bars |
|
ASTM B 280 |
Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service |
|
DOD B 280 |
Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service |
|
ASTM D 1586 |
Standard Test Method for Penetration Test and Split-Barrel Sampling of Soils |
|
DOD D 1586 |
Standard Test Method for Penetration Test and Split-Barrel Sampling of Soils |
|
DOD 96 |
Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations |
|
NFPA 96 |
Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations |
|
ANSI 33 |
Standard for Spray Application Using Flammable or Combustible Materials-2007 Edition |
|
NFPA 33 |
Standard for Spray Application Using Flammable or Combustible Materials-2007 Edition |
|
ANSI D1.4/D1.4M |
Structural Welding Code - Reinforcing Steel-Incorporates Errata: 10/2005 |
|
AWS D1.4/D1.4M |
Structural Welding Code - Reinforcing Steel-Incorporates Errata: 10/2005 |
|
DOD D1.4/D1.4M |
Structural Welding Code - Reinforcing Steel-Incorporates Errata: 10/2005 |
|
ANSI 12A |
Standard on Halon 1301 Fire Extinguishing Systems |
|
NFPA 12A |
Standard on Halon 1301 Fire Extinguishing Systems |
|
NFPA 654 |
Standard for the Prevention of Fire and Dust Explosions from the Manufacturing, Processing, and Handling of Combustible Particulate Solids-2006 Edition |
|
ANSI B20.1 |
Safety Standard for Conveyors and Related Equipment |
|
ASME B20.1 |
Safety Standard for Conveyors and Related Equipment |
|
DOD B20.1 |
Safety Standard for Conveyors and Related Equipment |
|
ANSI 13R |
Standard for the Installation of Sprinkler Systems in Residential Occupancies up to and Including Four Stories in Height-2007 Edition |
|
NFPA 13R |
Standard for the Installation of Sprinkler Systems in Residential Occupancies up to and Including Four Stories in Height-2007 Edition |
|
ASTM A 416/A 416M |
Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete |
|
DOD A 416/A 416M |
Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete |
|
ASTM D 635 |
Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position |
|
DOD D 635 |
Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position |
|
ASTM A 366/A 366M |
Standard Specification for Commercial Steel (CS) Sheet, Carbon, (0.15 Maximum Percent) Cold-Rolled-Replaced by ASTM A 1008/A1008M |
|
ANSI 409 |
Standard on Aircraft Hangars-TIA 04-1:05/04/2005; TIA 04-2:08/19/2006 |
|
DOD 409 |
Standard on Aircraft Hangars-TIA 04-1:05/04/2005; TIA 04-2:08/19/2006 |
|
NFPA 409 |
Standard on Aircraft Hangars-TIA 04-1:05/04/2005; TIA 04-2:08/19/2006 |
|
ASTM C 140 |
Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
|
DOD C 140 |
Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
|
ASTM G 155 REV A |
Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
|
DOD G 155 REV A |
Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
|
AA ADM-105 |
Aluminum Design Manual-Errata: 01/05 |
|
DOD ADM-105 |
Aluminum Design Manual-Errata: 01/05 |
|
ANSI 111 |
Standard on Stored Electrical Energy Emergency and Standby Power Systems |
|
NFPA 111 |
Standard on Stored Electrical Energy Emergency and Standby Power Systems |
|
ASTM D 1143/D 1143M |
Standard Test Methods for Deep Foundations Under Static Axial Compressive Load |
|
DOD D 1143/D 1143M |
Standard Test Methods for Deep Foundations Under Static Axial Compressive Load |
|
ASTM B 43 |
Standard Specification for Seamless Red Brass Pipe, Standard Sizes |
|
DOD B 43 |
Standard Specification for Seamless Red Brass Pipe, Standard Sizes |
|
ASTM D 2166 |
Standard Test Method for Unconfined Compressive Strength of Cohesive Soil |
|
ASTM C 840 |
Standard Specification for Application and Finishing of Gypsum Board |
|
DOD C 840 |
Standard Specification for Application and Finishing of Gypsum Board |
|
ASTM G 154 |
Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials |
|
ANSI E 1300 |
Standard Practice for Determining Load Resistance of Glass in Buildings |
|
ASTM E 1300 |
Standard Practice for Determining Load Resistance of Glass in Buildings |
|
ASTM C 476 |
Standard Specification for Grout for Masonry |
|
DOD C 476 |
Standard Specification for Grout for Masonry |
|
ASTM C 67 |
Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile |
|
DOD C 67 |
Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile |
|
ASTM A 641/A 641M |
Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire |
|
DOD A 641/A 641M |
Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire |
|
ANSI 13D |
Standard for the Installation of Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes-2007 Edition |
|
NFPA 13D |
Standard for the Installation of Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes-2007 Edition |
|
ASTM C 645 |
Standard Specification for Nonstructural Steel Framing Members |
|
DOD C 645 |
Standard Specification for Nonstructural Steel Framing Members |
|
DOD 17A |
Standard for Wet Chemical Extinguishing Systems |
|
NFPA 17A |
Standard for Wet Chemical Extinguishing Systems |
|
ASTM A 496/A 496M |
Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement |
|
DOD A 496/A 496M |
Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement |
|
ANSI E 136 |
Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750 Degrees C |
|
ASTM E 136 |
Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750 Degrees C |
|
DOD E 136 |
Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750 Degrees C |
|
ASTM C 989 |
Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars |
|
DOD C 989 |
Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars |
|
ASME A17.3 |
Safety Code for Existing Elevators and Escalators-Interpretations No. 6 |
|
ASTM B 251 |
Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube |
|
DOD B 251 |
Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube |
|
ASTM F 1667 |
Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
|
DOD F 1667 |
Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
|
ANSI TIA-222-G |
Structural Standard for Antenna Supporting Structures and Antennas-EFFECTIVE JANUARY 1, 2006; Includes County Listing 07/20/2005 after TIA-222-G standard - Please contact Global Engineering Documents (1-800-447-3352 ext.4960) for a electronic version of the 07/20/2005 County Listing |
|
DOD TIA-222-G |
Structural Standard for Antenna Supporting Structures and Antennas-EFFECTIVE JANUARY 1, 2006; Includes County Listing 07/20/2005 after TIA-222-G standard - Please contact Global Engineering Documents (1-800-447-3352 ext.4960) for a electronic version of the 07/20/2005 County Listing |
|
EIA TIA-222-G |
Structural Standard for Antenna Supporting Structures and Antennas-EFFECTIVE JANUARY 1, 2006; Includes County Listing 07/20/2005 after TIA-222-G standard - Please contact Global Engineering Documents (1-800-447-3352 ext.4960) for a electronic version of the 07/20/2005 County Listing |
|
TIA TIA-222-G |
Structural Standard for Antenna Supporting Structures and Antennas-EFFECTIVE JANUARY 1, 2006; Includes County Listing 07/20/2005 after TIA-222-G standard - Please contact Global Engineering Documents (1-800-447-3352 ext.4960) for a electronic version of the 07/20/2005 County Listing |
|
ANSI E 814 |
Standard Test Method for Fire Tests of Through-Penetration Fire Stops |
|
ASTM E 814 |
Standard Test Method for Fire Tests of Through-Penetration Fire Stops |
|
DOD E 814 |
Standard Test Method for Fire Tests of Through-Penetration Fire Stops |
|
ASTM A 767/A 767M |
Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement |
|
DOD A 767/A 767M |
Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement |
|
ASTM C 330 |
Standard Specification for Lightweight Aggregates for Structural Concrete |
|
DOD C 330 |
Standard Specification for Lightweight Aggregates for Structural Concrete |
|
ANSI 864 |
UL Standard for Safety Control Units and Accessories for Fire Alarm Systems-Ninth Edition; Reprint with Revisions Through and Including May 29, 2007 |
|
DOD 864 |
UL Standard for Safety Control Units and Accessories for Fire Alarm Systems-Ninth Edition; Reprint with Revisions Through and Including May 29, 2007 |
|
UL 864 |
UL Standard for Safety Control Units and Accessories for Fire Alarm Systems-Ninth Edition; Reprint with Revisions Through and Including May 29, 2007 |
|
DOD 555 |
UL Standard for Safety Fire Dampers-Seventh Edition |
|
UL 555 |
UL Standard for Safety Fire Dampers-Seventh Edition |
|
ASTM C 754 |
Standard Specification for Installation of Steel Framing Members to Receive Screw- Attached Gypsum Panel Products |
|
DOD C 754 |
Standard Specification for Installation of Steel Framing Members to Receive Screw- Attached Gypsum Panel Products |
|
ANSI 30B |
Code for the Manufacture and Storage of Aerosol Products-2007 Edition |
|
NFPA 30B |
Code for the Manufacture and Storage of Aerosol Products-2007 Edition |
|
ASTM A 792/A 792M REV A |
Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process |
|
DOD A 792/A 792M REV A |
Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process |
|
ANSI 418 |
Standard for Heliports-2006 Edition |
|
NFPA 418 |
Standard for Heliports-2006 Edition |
|
ANSI 1963 |
Standard for Fire Hose Connections |
|
DOD 1963 |
Standard for Fire Hose Connections |
|
NFPA 1963 |
Standard for Fire Hose Connections |
|
ASTM C 91 |
Standard Specification for Masonry Cement |
|
DOD C 91 |
Standard Specification for Masonry Cement |
|
ASTM B 42 |
Standard Specification for Seamless Copper Pipe, Standard Sizes |
|
DOD B 42 |
Standard Specification for Seamless Copper Pipe, Standard Sizes |
|
ASTM C 635 |
Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-In Panel Ceilings |
|
DOD C 635 |
Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-In Panel Ceilings |
|
ASTM C 1019 |
Standard Test Method for Sampling and Testing Grout |
|
DOD C 1019 |
Standard Test Method for Sampling and Testing Grout |
|
ASTM D 4945 |
Standard Test Method for High-Strain Dynamic Testing of Piles |
|
ASTM E 90 |
Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements |
|
DOD E 90 |
Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements |
|
DOD TIA/EIA-568-B.3-1 |
Optical Fiber Cabling Components Standard; Addendum 1 - Additional Transmission Performance Specifications for 50/125 um Optical Fiber Cables-Addendum No. 1 to TIA/EIA-568-B.3 |
|
EIA TIA/EIA-568-B.3-1 |
Optical Fiber Cabling Components Standard; Addendum 1 - Additional Transmission Performance Specifications for 50/125 um Optical Fiber Cables-Addendum No. 1 to TIA/EIA-568-B.3 |
|
TIA TIA/EIA-568-B.3-1 |
Optical Fiber Cabling Components Standard; Addendum 1 - Additional Transmission Performance Specifications for 50/125 um Optical Fiber Cables-Addendum No. 1 to TIA/EIA-568-B.3 |
|
DOD 701 |
Standard Methods of Fire Tests for Flame Propagation of Textiles and Films |
|
NFPA 701 |
Standard Methods of Fire Tests for Flame Propagation of Textiles and Films |
|
ASTM C 1240 |
Standard Specification for Silica Fume Used in Cementitious Mixtures |
|
DOD TIA/EIA-568 SET |
Commercial Building Telecommunications Cabling Standard Part 1: General Requirements, Part 2: Balanced Twisted-Pair Cabling Components, and Part 3: Optical Fiber Cabling Components Standard-Revision B; Includes Addendums: B.1-1, B.1-2, B.1-3, B.1-4, B.1-5, B.1-7, B.2-1, B.2-2, B.2-3, B.2-4, B.2-4, B.2-5, B.2-6, B.2-9, B.2-11, and B.3-1 12/02/2005 |
|
EIA TIA/EIA-568 SET |
Commercial Building Telecommunications Cabling Standard Part 1: General Requirements, Part 2: Balanced Twisted-Pair Cabling Components, and Part 3: Optical Fiber Cabling Components Standard-Revision B; Includes Addendums: B.1-1, B.1-2, B.1-3, B.1-4, B.1-5, B.1-7, B.2-1, B.2-2, B.2-3, B.2-4, B.2-4, B.2-5, B.2-6, B.2-9, B.2-11, and B.3-1 12/02/2005 |
|
TIA TIA/EIA-568 SET |
Commercial Building Telecommunications Cabling Standard Part 1: General Requirements, Part 2: Balanced Twisted-Pair Cabling Components, and Part 3: Optical Fiber Cabling Components Standard-Revision B; Includes Addendums: B.1-1, B.1-2, B.1-3, B.1-4, B.1-5, B.1-7, B.2-1, B.2-2, B.2-3, B.2-4, B.2-4, B.2-5, B.2-6, B.2-9, B.2-11, and B.3-1 12/02/2005 |
|
ASTM C 1157 |
Standard Performance Specification for Hydraulic Cement |
|
ASTM C 636/C 636M |
Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels |
|
DOD C 636/C 636M |
Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels |
|
ASTM C 55 |
Standard Specification for Concrete Building Brick |
|
DOD C 55 |
Standard Specification for Concrete Building Brick |
|
ANSI E 331 |
Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference |
|
ASTM E 331 |
Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference |
|
DOD E 331 |
Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference |
|
ASTM D 4067 |
Standard Classification System for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods |
|
DOD D 4067 |
Standard Classification System for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods |
|
SMACNA 1481 |
HVAC Duct Construction Standards Metal and Flexible-Second Edition; Addendum No. 1 November 1997 |
|
ASTM C 1218/C 1218M |
Standard Test Method for Water-Soluble Chloride in Mortar and Concrete |
|
ANSI 252 |
Standard Methods of Fire Tests of Door Assemblies |
|
DOD 252 |
Standard Methods of Fire Tests of Door Assemblies |
|
NFPA 252 |
Standard Methods of Fire Tests of Door Assemblies |
|
ASTM D 3278 |
Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
|
DOD D 3278 |
Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
|
ASTM A 913/A 913M |
Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST) |
|
ANSI 34 |
Standard for Dipping and Coating Processes Using Flammable or Combustible Liquids-2007 Edition |
|
NFPA 34 |
Standard for Dipping and Coating Processes Using Flammable or Combustible Liquids-2007 Edition |
|
ANSI 655 |
Standard for Prevention of Sulfur Fires and Explosions |
|
NFPA 655 |
Standard for Prevention of Sulfur Fires and Explosions |
|
ANSI A18.1 |
Safety Standard for Platform Lifts and Stairway Chairlifts-Incorporating Errata: 04/2006 |
|
ASME A18.1 |
Safety Standard for Platform Lifts and Stairway Chairlifts-Incorporating Errata: 04/2006 |
|
ASTM D 226 |
Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing |
|
DOD D 226 |
Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing |
|
ANSI E 605 |
Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
|
ASTM E 605 |
Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
|
DOD E 605 |
Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
|
DOD 1650 |
Seismic Restraint Manual Guidelines for Mechanical Systems-Second Edition; Addendum 1 (2000) |
|
SMACNA 1650 |
Seismic Restraint Manual Guidelines for Mechanical Systems-Second Edition; Addendum 1 (2000) |
|
ANSI 61 |
Standard for the Prevention of Fires and Dust Explosions in Agricultural and Food Processing Facilities |
|
NFPA 61 |
Standard for the Prevention of Fires and Dust Explosions in Agricultural and Food Processing Facilities |
|
ASTM A 421/A 421M |
Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete-AASHTO No.: M 204 |
|
DOD A 421/A 421M |
Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete-AASHTO No.: M 204 |
|
ASTM C 685/C 685M |
Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing |
|
DOD C 685/C 685M |
Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing |
|
ASTM D 1929 |
Standard Test Method for Determining Ignition Temperature of Plastics |
|
DOD D 1929 |
Standard Test Method for Determining Ignition Temperature of Plastics |
|
ASTM D 25 |
Standard Specification for Round Timber Piles |