A/E/C REFERENCED STANDARDS - IECC Collection

Description:
A/E/C REFERENCED STANDARDS - IECC Collection contains more than 180 documents.

The IHS Architecture, Engineering, and Construction (AEC) collection contains several groups of specifications and standards. This collection includes performance guidelines, requirements, and ratings related to the heating and cooling aspects of construction projects. Documents available in this group are generated by more than 10 consensus and regulatory organizations. These standards and specifications would be of interest to engineers, architects, and constructors as well as vendors and manufacturers supplying products and services for construction projects. Topics covered include: air conditioning, heat pumps, water pumps, condensers, water chillers, water heaters, fenestration, ventilation for acceptable indoor air quality, energy standards for buildings except low-rise residential buildings, HVAC systems and equipment, air leakage, energy conservation, and air duct and heater safety standards.

Online Access - Subscribers get secure online access to search, view, bookmark, track, and print documents according to the license agreement. Online documents are updated daily. Multiple users can share a single license. You also get access to IHS Standards bibliographic data – more than 1 Million documents.

Individual Documents - IHS sell individual documents through the IHS Store in electronic or hard copy formats. Statistics show that 1 out of every 5 people who purchase individual documents would benefit from an online subscription. You should consider a collection over individual document purchases if your company buys more than $3,000 in standards per year.

ARI 210/240

Unitary Air-Conditioning and Air-Source Heat Pump Equipment

ARI 210/240

Unitary Air-Conditioning and Air-Source Heat Pump Equipment (Best Copy Available)

ARI 310/380

Standard for Packaged Terminal Air-Conditioners and Heat Pumps

ARI 320

Water-Source Heat Pumps

ARI 325

Ground Water-Source Heat Pumps

ARI 340/360

PERFORMANCE RATING OF COMMERCIAL AND INDUSTRIAL UNITARY AIR-CONDITIONING AND HEAT PUMP EQUIPMENT

ARI 365

Commercial and Industrial Unitary Air-Conditioning Condensing Units

ARI 460

Remote Mechanical-Draft Air-Cooled Refrigerant Condensers

ARI 550/590

Water Chilling Packages Using the Vapor Compression Cycle

ARI 560

Absorption Water Chilling and Water Heating Packages

ASCE 7- 05

Minimum Design Loads for Buildings and Other Structures-Including Supplement 1

ASHRAE 136

A Method of Determining Air Change Rates in Detached Dwellings

ASHRAE 146

Method of Testing and Rating Pool Heaters

ASHRAE 55

Thermal Environmental Conditions for Human Occupancy-Includes Interpretation 1: 06/25/2005 and Incorporated Editorial Changes: 08/08/2005

ASHRAE 62

Ventilation for Acceptable Indoor Air Quality-Addendas T, U and V: 01/12/02; Addendums K and O: 06/27/02; Errata: 10/02/2002; Addendums R, Z, AD, and AF: 01/30/03; Addendums X and AE: 07/03/03;Errata: 07/17/03; Addendums H and N 6/28/2003; Addendum Y and

ASHRAE 62.1

Ventilation for Acceptable Indoor Air Quality-Includes Addenda listed in Appendix H; Supersedes 62: 2001; Errata: 06/03/2005

ASHRAE 90.1 I- P

Energy Standard for Buildings Except Low-Rise Residential Buildings-I-P Edition;Includes Addenda Listed in Appendix F; Addendum AD: 02/10/2005; Errata 4/20/2005; Interpretation 1: 06/25/2005

ASHRAE 90.1 SI

Energy Standard for Buildings Except Low-Rise Residential Buildings-SI Edition; Includes Addenda Listed in Appendix F; Addendum AD: 02/10/2005; Errata 4/20/2005; Interpretation 1: 06/25/2005

ASHRAE EQUIP IP HDBK

2004 ASHRAE Handbook HVAC Systems and Equipment IP Edition

ASHRAE EQUIP SI

2004 ASHRAE HVAC Systems and Equipment SI Edition

ASHRAE EQUIP SI ADDITIONS AND CORRECTIONS

Additions and Corrections

ASHRAE EQUIP SI HDBK

2004 ASHRAE Handbook HAVC Systems and Equipment SI Edition

ASHRAE FUN IP HDBK

2005 ASHRAE Handbook Fundamentals I-P Edition-***For IHS ASHRAE Subscription Customers Only - Contact IHS/Retail (1-800-854-7179) for One Complimentary CD-ROM***

ASHRAE FUN SI HDBK

2005 ASHRAE Handbook Fundamentals SI Edition-***For IHS ASHRAE Subscription Customers Only - Contact IHS/Retail (1-800-854-7179) for One Complimentary CD-ROM***

ASHRAE HVAC APP IP HDBK

2003 ASHRAE Handbook HVAC Applications I-P Edition

ASHRAE HVAC APP SI HDBK

2003 ASHRAE Handbook HVAC Applications SI Edition

ASME A112.18.1

Plumbing Fixture Fittings

ASTM C 236

Standard Test Method for Steady-State Thermal Performance of Building Assemblies by Means of a Guarded Hot Box-(Discontinued 2001; Replaced By ASTM C 1363)

ASTM C 496/C 496M

Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens

ASTM C 518

Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

ASTM C 976

Standard Test Method for Thermal Performance of Building Assemblies by Means of a Calibrated Hot Box-(Discontinued 2002; Replaced by ASTM C 1363)

ASTM E 283

Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

ASTM E 779

Standard Test Method for Determining Air Leakage Rate by Fan Pressurization

ASTM E 96/E 96M

Standard Test Methods for Water Vapor Transmission of Materials

CSA/AM CSA/ANSI Z21.13

Gas-Fired Low Pressure Steam and Hot Water Boilers-First Edition; CSA 4.9-2000; Erratum: 04/2001; Addenda A-2002; Addenda B-2003

CSA/AM CSA/ANSI Z21.56

Gas-Fired Pool Heaters-Second Edition; CSA 4.7-2001; Addenda A:2004; Addenda B: 2004

CSA/AM Z21.11.1

Gas-Fired Room Heaters Volume I Vented Room Heaters-Twenty- Second Edition

CSA/AM Z21.11.1A

Gas-Fired Room Heaters Volume I Vented Room Heaters

CSA/AM Z21.11.1B

Gas-Fired Room Heaters Volume I Vented Room Heaters- Twenty-Second Edition

DOE 10 CFR 430 SUBPART B

Energy Conservation Program for Consumer Products Subpart B - Test Procedures

ICC ICC/ANSI A117.1

Accessible and Usable Buildings and Facilities

NFRC 100

Procedure for Determining Fenestration Product U-factors

NFRC 100 SECTION B

Procedure for Determining Door Systems Product Thermal Properties (Currently Limited to U-Factors)-Supercedes and replaces NFRC 100-B (1995)

NFRC 100- SB

Procedure for Determining Site-Built Fenestration U-factors and Thermal Performance Characteristics

NFRC 200

Procedure for Determining Fenestration Product Solar Heat Gain Coefficient and Visible Transmittance at Normal Incidence

NFRC 400

Procedure for Determining Fenestration Product Air Leakage

SMACNA 1117

Fibrous Glass Duct Construction Standards-Sixth Edition; Technical Research Update - 1992

SMACNA 1143

HVAC Air Duct Leakage Test Manual-First Edition; Technical Research Update - 92

SMACNA 1481

HVAC Duct Construction Standards Metal and Flexible-Second Edition; Addendum No. 1 November 1997

SMACNA 1689

Residential Comfort System Installation Standards Manual-Seventh Edition

TIA TIA/EIA-568-B SET

Commercial Building Telecommunications Cabling Standard Part 1: General Requirements, Part 2: Balanced Twisted-Pair Cabling Components, and Part 3: Optical Fiber Cabling Components Standard-Includes Addendums: B.1-1, B.1-2, B.1-3, B.1-4, B.1-5, B.2-1, B.2

TIA TIA/EIA-568- B.1

Commercial Building Telecommunications Cabling Standard Part 1: General Requirements-Revision of TIA/EIA-568-A

TIA TIA/EIA-568-B.1- 1

Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius-Addendum 1: August 2001

TIA TIA/EIA-568- B.2

Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components-Revision of TIA/EIA-568-A; Errata

TIA TIA/EIA-568-B.2- 1

Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted Pair Cabling Components Addendum 1 - Transmission Performance Specifications for 4-Pair 100 Category 6 Cabling-Addendum No. 1 to TIA/EIA-568- B.2

TIA TIA/EIA-568-B.2- 2

Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components Addendum 2-Addendum No. 2 to TIA/EIA-568- B.2

TIA TIA/EIA-568-B.2- 3

Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted Pair Cabling Components Addendum 3 - Additional Considerations for Insertion Loss and Return Loss Pass/Fail Determination-Addendum No. 3 to TIA/EIA-568- B.2

TIA TIA/EIA-568-B.2- 4

Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted Pair Cabling Components Addendum 4 - Solders Connection Reliability Requirements for Copper Connecting Hardware-Addendum 4: June 2002

TIA TIA/EIA-568- B.3

Optical Fiber Cabling Components Standard

TIA TIA/EIA-568-B.3- 1

Optical Fiber Cabling Components Standard; Addendum 1 - Additional Transmission Performance Specifications for 50/125 um Optical Fiber Cables-Addendum No. 1 to TIA/EIA-568-B.3

TIA TIA-568-B.1- 2

Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 2 - Grounding and Bonding Specifications for Screened Balanced Twisted-Pair Horizontal Cabling-Addendum 2: February 2003

TIA TIA-568-B.1- 3

Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 3 - Supportable Distances and Channel Attenuation for Optical Fiber Applications by Fiber Type-Addendum 3: February 2003

TIA TIA-568-B.1- 4

Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 4 - Recognition of Category 6 and 850 nm Laser-Optimized 50/125 um Multimode Optical Fiber Cabling-Addendum 4: February 2003

TIA TIA-568-B.1- 5

Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 5 Telecommunications Cabling for Telecommunications Enclosures-Addendum 5: March 2003

TIA TIA-568-B.1- 7

Commercial Building Telecommunications Cabling Standard Part 1 - General Requirements Addendum 7 Guidelines for Maintaining Polarity Using Array Connectors-Addendum 7

TIA TIA-568-B.2- 11

Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components Addendum 11 Specification of 4-Pair UTP and SCTP Cabling-Addendum 11: DECEMBER 2005

TIA TIA-568-B.2- 5

Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted Pair Cabling Components Addendum 5 - Corrections to TIA/EIA-568-B.2- Addendum 5: January 2003

TIA TIA-568-B.2- 6

Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted Pair Cabling Components Addendum 6 Category 6 Related Component Test Procedures-Addendum 6: October 2003

TIA TIA-570- B

Residential Telecommunications Infrastructure Standard

UL 181

UL Standard for Safety Factory-Made Air Ducts and Connectors-Tenth Edition

UL 181A

UL Standard for Safety Closure Systems for Use with Rigid Air Ducts- Third Edition

UL 181B

UL Standard for Safety Closure Systems for Use with Flexible Air Ducts and Air Connectors-Second Edition

UL 731

UL Standard for Safety Oil-Fired Unit Heaters-Fifth Edition; Reprint with Revisions Through and Including 5/14/2004