|
ASME B16.20 |
Metallic Gaskets for Pipe Flanges Ring-Joint, Spiral-Wound, and Jacketed-Addenda A - 07/21/2000 |
|
ASME B16.20A |
Addenda to B16.20-1993 Metallic Gaskets for Pipe Flanges - Ring- Joint, Spiral-Wound, and Jacketed |
|
ASME B16.20B |
Addenda to B16.20-1993 Metallic Gaskets for Pipe Flanges - Ring- Joint, Spiral-Wound, and Jacketed |
|
ASME CSD- 1 |
Controls and Safety Devices for Automatically Fired Boilers |
|
ASTM A 106/A 106M REV B |
Standard Specification for Seamless Carbon Steel Pipe for High- Temperature Service |
|
ASTM A 254 |
Standard Specification for Copper-Brazed Steel Tubing |
|
ASTM A 539 |
Standard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines-(Withdrawn 2004; No Replacement) |
|
ASTM B 210 |
Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes |
|
ASTM B 241/B 241M |
Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
|
ASTM B 280 |
Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service |
|
ASTM B 88 |
Standard Specification for Seamless Copper Water Tube |
|
AWWA C111/A21.11 |
Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings |
|
CSA/AM ANSI Z21.11.2 |
Gas-Fired Room Heaters Volume II, Unvented Room Heaters- Twenty-Fourth Edition; Addenda B:2004 |
|
CSA/AM ANSI Z21.11.2 |
Gas-Fired Room Heaters, Volume II, Unvented Room Heaters- Twenty-Third Edition |
|
CSA/AM ANSI Z21.11.2 |
Gas-Fired Room Heaters Volume II, Unvented Room Heaters- Twenty-Fourth Edition |
|
CSA/AM ANSI Z21.11.2 |
Gas-Fired Room Heaters, Volume II, Unvented Room Heaters- Twenty-Third Edition; Addenda A-2001; Addenda B-2002 |
|
CSA/AM ANSI Z21.11.2 |
Gas-Fired Room Heaters, Volume II, Unvented Room Heaters- Twenty-Third Edition; Addenda A-2001 |
|
CSA/AM ANSI Z21.11.2A |
Gas-Fired Room Heaters Volume II, Unvented Room Heaters- Addenda to ANSI Z21.11.2-1996 |
|
CSA/AM ANSI Z21.11.2B |
Gas-Fired Room Heaters Volume II, Unvented Room Heaters- Twenty Second Edition; Addenda to Z21.11.2-1996 and Z21.11.2a-1997 |
|
CSA/AM ANSI Z21.60- 2003 |
Decorative Gas Appliances for Installation in Solid-Fuel Burning Fireplaces-Second Edition; CSA 2.26-2003; Addenda ANSI Z-21.60A-2003; Addenda ANSI Z21.60B-2004; Addenda ANSI Z21.60B-2004 |
|
CSA/AM ANSI Z21.61 |
Gas-Fired Toilets-Second Edition |
|
CSA/AM ANSI Z21.8 |
Installation of Domestic Gas Conversion Burners Eighth Edition |
|
CSA/AM ANSI Z83.4- 2003 |
Non-Recirculating Direct Gas-Fired Industrial Air Heaters-Second Edition; CSA 3.7-2003; Addenda ANSIZ83.4A-2004 |
|
CSA/AM ANSI Z83.6B |
Addenda to Z83.6-1990 Gas-Fired Infrared Heaters-Replaced by Z83.19-2001 |
|
CSA/AM CSA/ANSI Z21.10.3 |
Gas Water Heaters Volume III, Storage Water Heaters, with Input Ratings Above 75,000 Btu per Hour, Circulating and Instantaneous-Second Edition; CSA 4.3- 2001; Addenda A:2003; Addenda B:2004 |
|
CSA/AM CSA/ANSI Z21.15 |
Manually Operated Gas Valves for Appliances, Appliance Connector Valves and Hose End Valves-First Edition; CSA/CGA 9.1-M97; Addenda A-2001 |
|
CSA/AM CSA/ANSI Z21.19 |
Refrigerators Using Gas Fuel-First Edition; CSA 1.4-2002 |
|
CSA/AM CSA/ANSI Z21.40.1 |
Gas-Fired, Heat Activated Air Conditioning and Heat Pump Appliances-First Edition; CSA/CGA 2.91-M96; Addenda A-1997 |
|
CSA/AM CSA/ANSI Z21.40.2 |
Gas-Fired, Work Activated Air-Conditioning and Heat Pump Appliances (Internal Combustion)-First Edition; CSA/CGA 2.92-M96; Addenda A-1997 |
|
CSA/AM CSA/ANSI Z21.5.2 |
Gas Clothes Dryers Volume II - Type 2 Clothes Dryers-Third Edition; CSA 7.2: 2005 |
|
CSA/AM CSA/ANSI Z21.69 |
Connectors for Movable Gas Appliances-Second Edition; CSA 6.16- 2002; Addenda 6.16a-2003 |
|
CSA/AM CSA/ANSI Z83.11 |
Gas Food Service Equipment-CSA 1.8-2002; Addenda A: 2004 |
|
CSA/AM CSA/ANSI Z83.8 |
Gas Unit Heaters and Gas-Fired Duct Furnaces-Second Edition; CSA/CGA 2.6-2002; Addenda A-2003; Addenda B-2004 |
|
CSA/AM CSA/ANSI/IAS LC 1-2005 |
Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing (CSST)-Second Edition; CSA 6.26-2005 |
|
CSA/AM Z21.11.1 |
Gas-Fired Room Heaters Volume I Vented Room Heaters-Twenty- Second Edition |
|
CSA/AM Z21.11.1A |
Gas-Fired Room Heaters Volume I Vented Room Heaters |
|
CSA/AM Z21.11.1B |
Gas-Fired Room Heaters Volume I Vented Room Heaters- Twenty-Second Edition |
|
CSA/AM Z21.11.2 |
Gas-Fired Room Heaters, Volume II, Unvented Room Heaters- Twenty-Second Edition |
|
CSA/AM Z21.48 |
Gas-Fired Gravity and Fan Type Floor Furnaces Twenty-Fourth Edition |
|
CSA/AM Z21.48A |
Gas-Fired Gravity and Fan Type Floor Furnaces |
|
CSA/AM Z21.48B |
Gas-Fired Gravity and Fan Type Floor Furnaces Twenty-Fourth Edition |
|
CSA/AM Z21.49 |
Gas-Fired Gravity and Fan Type Vented Wall Furnaces-Twenty-Fifth Edition |
|
CSA/AM Z21.49A |
Gas-Fired Gravity and Fan Type Vented Wall Furnaces-Addenda to Z21.49-1992 |
|
CSA/AM Z21.49B |
Gas-Fired Gravity and Fan Type Vented Wall Furnaces-Addenda to Z21.49-1992 and Z21.49a-1993 |
|
DOT 49 CFR 172 |
Research and Special Programs Administration, Department of Transportation - Part 172 - Hazardous Materials Table, Special Provisions, Hazardous Materials Communications, Emergency Response Information, and Training Requirements |
|
DOT 49 CFR 173 |
Research and Special Programs Administration, Department of Transportation - Part 173 - Shippers - General Requirements for Shipments and Packagings |
|
DOT 49 CFR 192.281 |
Research and Special Programs Administration, Department of Transportation - Part 192 - Transportation of Natural and Other Gas by Pipeline: Minimum Federal Safety Standards 192.281 - Plastic Pipe |
|
DOT 49 CFR 192.283 |
Research and Special Programs Administration, Department of Transportation - Part 192 - Transportation of Natural and Other Gas by Pipeline: Minimum Federal Safety Standards 192.283 - Plastic Pipe: Qualifying Joining Procedures |
|
MSS SP- 58 |
Pipe Hangers and Supports - Materials, Design and Manufacture |
|
MSS SP- 6 |
Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings |
|
TIA TIA/EIA-568-B SET |
Commercial Building Telecommunications Cabling Standard Part 1: General Requirements, Part 2: Balanced Twisted-Pair Cabling Components, and Part 3: Optical Fiber Cabling Components Standard-Includes Addendums: B.1-1, B.1-2, B.1-3, B.1-4, B.1-5, B.2-1, B.2 |
|
TIA TIA/EIA-568- B.1 |
Commercial Building Telecommunications Cabling Standard Part 1: General Requirements-Revision of TIA/EIA-568-A |
|
TIA TIA/EIA-568-B.1- 1 |
Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius-Addendum 1: August 2001 |
|
TIA TIA/EIA-568- B.2 |
Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components-Revision of TIA/EIA-568-A; Errata |
|
TIA TIA/EIA-568-B.2- 1 |
Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted Pair Cabling Components Addendum 1 - Transmission Performance Specifications for 4-Pair 100 Category 6 Cabling-Addendum No. 1 to TIA/EIA-568- B.2 |
|
TIA TIA/EIA-568-B.2- 2 |
Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components Addendum 2-Addendum No. 2 to TIA/EIA-568- B.2 |
|
TIA TIA/EIA-568-B.2- 3 |
Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted Pair Cabling Components Addendum 3 - Additional Considerations for Insertion Loss and Return Loss Pass/Fail Determination-Addendum No. 3 to TIA/EIA-568- B.2 |
|
TIA TIA/EIA-568-B.2- 4 |
Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted Pair Cabling Components Addendum 4 - Solders Connection Reliability Requirements for Copper Connecting Hardware-Addendum 4: June 2002 |
|
TIA TIA/EIA-568- B.3 |
Optical Fiber Cabling Components Standard |
|
TIA TIA/EIA-568-B.3- 1 |
Optical Fiber Cabling Components Standard; Addendum 1 - Additional Transmission Performance Specifications for 50/125 um Optical Fiber Cables-Addendum No. 1 to TIA/EIA-568-B.3 |
|
TIA TIA-568-B.1- 2 |
Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 2 - Grounding and Bonding Specifications for Screened Balanced Twisted-Pair Horizontal Cabling-Addendum 2: February 2003 |
|
TIA TIA-568-B.1- 3 |
Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 3 - Supportable Distances and Channel Attenuation for Optical Fiber Applications by Fiber Type-Addendum 3: February 2003 |
|
TIA TIA-568-B.1- 4 |
Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 4 - Recognition of Category 6 and 850 nm Laser-Optimized 50/125 um Multimode Optical Fiber Cabling-Addendum 4: February 2003 |
|
TIA TIA-568-B.1- 5 |
Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 5 Telecommunications Cabling for Telecommunications Enclosures-Addendum 5: March 2003 |
|
TIA TIA-568-B.1- 7 |
Commercial Building Telecommunications Cabling Standard Part 1 - General Requirements Addendum 7 Guidelines for Maintaining Polarity Using Array Connectors-Addendum 7 |
|
TIA TIA-568-B.2- 11 |
Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components Addendum 11 Specification of 4-Pair UTP and SCTP Cabling-Addendum 11: DECEMBER 2005 |
|
TIA TIA-568-B.2- 5 |
Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted Pair Cabling Components Addendum 5 - Corrections to TIA/EIA-568-B.2- Addendum 5: January 2003 |
|
TIA TIA-568-B.2- 6 |
Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted Pair Cabling Components Addendum 6 Category 6 Related Component Test Procedures-Addendum 6: October 2003 |
|
TIA TIA-570- B |
Residential Telecommunications Infrastructure Standard |
|
UL 127 |
UL Standard for Safety Factory-Built Fireplaces-Seventh Edition; Reprint with Revisions Through and Including 11/09/1999 |
|
UL 1738 |
UL Standard for Safety Venting Systems for Gas-Burning Appliances, Categories II, III, and IV-Second Edition; Reprint with Revisions Through and Including 12/06/2000 |
|
UL 1777 |
UL Standard for Safety Chimney Liners-Third Edition |
|
UL 441 |
UL Standard for Safety Gas Vents-Ninth Edition; Reprint with Revisions Through and Including 12/30/1999 |
|
UL 641 |
UL Standard for Safety Type L Low-Temperature Venting Systems- Seventh Edition; Reprint with Revisions Through and Including August 12, 2005 |
|
UL 641 BULLETINS |
CSDS 5/27/2005 (4p) |
|
UL 959 |
UL Standard for Safety Medium Heat Appliance Factory-Built Chimneys- Eighth Edition; Reprint with Revisions Through and Including 06/05/2001 |