|
ASTM A 36/A 36M |
Standard Specification for Carbon Structural Steel |
|
DOD A 36/A 36M |
Standard Specification for Carbon Structural Steel |
|
ASTM A 106/A 106M REV A |
Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service |
|
ANSI B16.11 |
Forged Fittings, Socket-Welding and Threaded |
|
ASME B16.11 |
Forged Fittings, Socket-Welding and Threaded |
|
DOD B16.11 |
Forged Fittings, Socket-Welding and Threaded |
|
ASTM B 209 |
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
|
DOD B 209 |
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
|
ANSI B36.10M |
Welded and Seamless Wrought Steel Pipe |
|
ASME B36.10M |
Welded and Seamless Wrought Steel Pipe |
|
DOD B36.10M |
Welded and Seamless Wrought Steel Pipe |
|
ASTM A 312/A 312M |
Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
|
DOD A 312/A 312M |
Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
|
ASTM A 53/A 53M REV A |
Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
|
DOD A 53/A 53M REV A |
Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
|
ACI 318/318R |
Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary (ACI 318R-05)-Errata: 08/11/2005 |
|
DOD 318/318R |
Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary (ACI 318R-05)-Errata: 08/11/2005 |
|
ASCE 7-05 |
Minimum Design Loads for Buildings and Other Structures-Including Supplement 1 |
|
DOD 7-05 |
Minimum Design Loads for Buildings and Other Structures-Including Supplement 1 |
|
ANSI B1.20.1 |
Pipe Threads, General Purpose (Inch)-Revision and Redesignation of ASME/ANSI B2.1-1968 |
|
ASME B1.20.1 |
Pipe Threads, General Purpose (Inch)-Revision and Redesignation of ASME/ANSI B2.1-1968 |
|
DOD B1.20.1 |
Pipe Threads, General Purpose (Inch)-Revision and Redesignation of ASME/ANSI B2.1-1968 |
|
ASTM A 153/A 153M |
Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware-AASHTO No.: M232 |
|
DOD A 153/A 153M |
Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware-AASHTO No.: M232 |
|
ASTM A 167 |
Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
|
DOD A 167 |
Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
|
ASHRAE FUN IP HDBK |
2005 ASHRAE Handbook Fundamentals I-P Edition-***For IHS ASHRAE Subscription Customers Only - Contact IHS/Retail (1-800-854-7179) for One Complimentary CD-ROM*** |
|
ASTM B 88 |
Standard Specification for Seamless Copper Water Tube |
|
DOD B 88 |
Standard Specification for Seamless Copper Water Tube |
|
ANSI B16.28 |
Wrought Steel Buttwelding Short Radius Elbows and Returns |
|
ASME B16.28 |
Wrought Steel Buttwelding Short Radius Elbows and Returns |
|
DOD B16.28 |
Wrought Steel Buttwelding Short Radius Elbows and Returns |
|
ASTM D 3350 |
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials |
|
ASTM D 1784 REV A |
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds |
|
DOD D 1784 REV A |
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds |
|
ASTM C 143/C 143M REV A |
Standard Test Method for Slump of Hydraulic-Cement Concrete |
|
DOD C 143/C 143M REV A |
Standard Test Method for Slump of Hydraulic-Cement Concrete |
|
ACI 318M |
Building Code Requirements for Structural Concrete and Commentary (ACI 318M-05)-Errata: 08/11/2005 |
|
ANSI TIA-568-B.1-7 |
Commercial Building Telecommunications Cabling Standard Part 1 - General Requirements Addendum 7 – Guidelines for Maintaining Polarity Using Array Connectors-Addendum 7 |
|
DOD TIA-568-B.1-7 |
Commercial Building Telecommunications Cabling Standard Part 1 - General Requirements Addendum 7 – Guidelines for Maintaining Polarity Using Array Connectors-Addendum 7 |
|
EIA TIA-568-B.1-7 |
Commercial Building Telecommunications Cabling Standard Part 1 - General Requirements Addendum 7 – Guidelines for Maintaining Polarity Using Array Connectors-Addendum 7 |
|
TIA TIA-568-B.1-7 |
Commercial Building Telecommunications Cabling Standard Part 1 - General Requirements Addendum 7 – Guidelines for Maintaining Polarity Using Array Connectors-Addendum 7 |
|
ANSI TIA-568-B.2-9 |
Commercial Building Telecommunications Cabling Standard Part 2 - Balanced Twisted-Pair Cabling Components Addendum 9 – Additional Category 6 Balance Requirements and Measurement Procedures |
|
DOD TIA-568-B.2-9 |
Commercial Building Telecommunications Cabling Standard Part 2 - Balanced Twisted-Pair Cabling Components Addendum 9 – Additional Category 6 Balance Requirements and Measurement Procedures |
|
EIA TIA-568-B.2-9 |
Commercial Building Telecommunications Cabling Standard Part 2 - Balanced Twisted-Pair Cabling Components Addendum 9 – Additional Category 6 Balance Requirements and Measurement Procedures |
|
TIA TIA-568-B.2-9 |
Commercial Building Telecommunications Cabling Standard Part 2 - Balanced Twisted-Pair Cabling Components Addendum 9 – Additional Category 6 Balance Requirements and Measurement Procedures |
|
ANSI B16.15 |
Cast Bronze Threaded Fittings Classes 125 and 250 |
|
ASME B16.15 |
Cast Bronze Threaded Fittings Classes 125 and 250 |
|
DOD B16.15 |
Cast Bronze Threaded Fittings Classes 125 and 250 |
|
ASTM B 75 |
Standard Specification for Seamless Copper Tube |
|
DOD B 75 |
Standard Specification for Seamless Copper Tube |
|
ACI 530 |
Building Code Requirements for Masonry Structures and Commentary-ASCE 5-05/TMS 402-05 |
|
ANSI F 714 REV A |
Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter |
|
ASTM F 714 REV A |
Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter |
|
ASTM B 32 |
Standard Specification for Solder Metal |
|
DOD B 32 |
Standard Specification for Solder Metal |
|
ASTM D 4318 |
Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils |
|
DOD D 4318 |
Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils |
|
ASTM C 90 REV B |
Standard Specification for Loadbearing Concrete Masonry Units |
|
DOD C 90 REV B |
Standard Specification for Loadbearing Concrete Masonry Units |
|
ASTM E 96/E 96M |
Standard Test Methods for Water Vapor Transmission of Materials |
|
DOD E 96/E 96M |
Standard Test Methods for Water Vapor Transmission of Materials |
|
ASTM A 510 |
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel |
|
DOD A 510 |
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel |
|
ASTM A 197/A 197M |
Standard Specification for Cupola Malleable Iron |
|
DOD A 197/A 197M |
Standard Specification for Cupola Malleable Iron |
|
ANSI B16.18 |
Cast Copper Alloy Solder Joint Pressure Fittings |
|
ASME B16.18 |
Cast Copper Alloy Solder Joint Pressure Fittings |
|
DOD B16.18 |
Cast Copper Alloy Solder Joint Pressure Fittings |
|
ACI 530.1 |
Specification for Masonry Structures-ASCE 6-05/TMS 602-05 |
|
DOD 530.1 |
Specification for Masonry Structures-ASCE 6-05/TMS 602-05 |
|
ASTM D 1248 |
Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
|
DOD D 1248 |
Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
|
ASTM B 280 |
Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service |
|
DOD B 280 |
Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service |
|
ANSI D 3035 |
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter |
|
ASTM D 3035 |
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter |
|
ANSI CSD-1 |
Controls and Safety Devices for Automatically Fired Boilers |
|
ASME CSD-1 |
Controls and Safety Devices for Automatically Fired Boilers |
|
DOD CSD-1 |
Controls and Safety Devices for Automatically Fired Boilers |
|
ASTM A 74 |
Standard Specification for Cast Iron Soil Pipe and Fittings-AASHTO No.: M 263-77 |
|
DOD A 74 |
Standard Specification for Cast Iron Soil Pipe and Fittings-AASHTO No.: M 263-77 |
|
ANSI 1995 |
UL Standard for Safety Heating and Cooling Equipment-Third Edition |
|
DOD 1995 |
UL Standard for Safety Heating and Cooling Equipment-Third Edition |
|
UL 1995 |
UL Standard for Safety Heating and Cooling Equipment-Third Edition |
|
ANSI C110/A21.10 |
Ductile-Iron and Gray-Iron Fittings for Water |
|
AWWA C110/A21.10 |
Ductile-Iron and Gray-Iron Fittings for Water |
|
ANSI B20.1 |
Safety Standard for Conveyors and Related Equipment |
|
ASME B20.1 |
Safety Standard for Conveyors and Related Equipment |
|
DOD B20.1 |
Safety Standard for Conveyors and Related Equipment |
|
ASTM D 635 |
Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position |
|
DOD D 635 |
Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position |
|
ANSI D 2665 |
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings |
|
ASTM D 2665 |
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings |
|
DOD D 2665 |
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings |
|
ASTM C 140 |
Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
|
DOD C 140 |
Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
|
ASTM C 578 |
Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation |
|
DOD C 578 |
Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation |
|
ANSI D 2241 |
Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) |
|
ASTM D 2241 |
Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) |
|
DOD D 2241 |
Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) |
|
ANSI B16.12 |
Cast Iron Threaded Drainage Fittings |
|
ASME B16.12 |
Cast Iron Threaded Drainage Fittings |
|
DOD B16.12 |
Cast Iron Threaded Drainage Fittings |
|
ANSI B16.33 |
Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 PSI (Sizes NPS 1/2 Through NPS 2) |
|
ASME B16.33 |
Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 PSI (Sizes NPS 1/2 Through NPS 2) |
|
DOD B16.33 |
Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 PSI (Sizes NPS 1/2 Through NPS 2) |
|
ANSI CSA/ANSI Z83.11 ERTA |
Gas Food Service Equipment-Third edition |
|
CSA/AM CSA/ANSI Z83.11 ERTA |
Gas Food Service Equipment-Third edition |
|
DOD CSA/ANSI Z83.11 ERTA |
Gas Food Service Equipment-Third edition |
|
ASTM B 43 |
Standard Specification for Seamless Red Brass Pipe, Standard Sizes |
|
DOD B 43 |
Standard Specification for Seamless Red Brass Pipe, Standard Sizes |
|
ANSI B16.26 |
Cast Copper Alloy Fittings for Flared Copper Tubes |
|
ASME B16.26 |
Cast Copper Alloy Fittings for Flared Copper Tubes |
|
DOD B16.26 |
Cast Copper Alloy Fittings for Flared Copper Tubes |
|
ASTM B 135 |
Standard Specification for Seamless Brass Tube |
|
DOD B 135 |
Standard Specification for Seamless Brass Tube |
|
ANSI C115/A21.15 |
Flanged Ductile-Iron Pipe with Ductile-Iron or Gray-Iron Threaded Flanges |
|
AWWA C115/A21.15 |
Flanged Ductile-Iron Pipe with Ductile-Iron or Gray-Iron Threaded Flanges |
|
DOD C115/A21.15 |
Flanged Ductile-Iron Pipe with Ductile-Iron or Gray-Iron Threaded Flanges |
|
ASTM C 476 |
Standard Specification for Grout for Masonry |
|
DOD C 476 |
Standard Specification for Grout for Masonry |
|
ASTM C 67 |
Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile |
|
DOD C 67 |
Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile |
|
ASTM A 641/A 641M |
Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire |
|
DOD A 641/A 641M |
Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire |
|
ASTM C 645 |
Standard Specification for Nonstructural Steel Framing Members |
|
DOD C 645 |
Standard Specification for Nonstructural Steel Framing Members |
|
ANSI B16.23 |
Cast Copper Alloy Solder Joint Drainage Fittings: DWV-Errata:March 2003 |
|
ASME B16.23 |
Cast Copper Alloy Solder Joint Drainage Fittings: DWV-Errata:March 2003 |
|
DOD B16.23 |
Cast Copper Alloy Solder Joint Drainage Fittings: DWV-Errata:March 2003 |
|
ANSI E 136 |
Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750 Degrees C |
|
ASTM E 136 |
Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750 Degrees C |
|
DOD E 136 |
Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750 Degrees C |
|
ANSI F 441/F 441M |
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 |
|
ASTM F 441/F 441M |
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 |
|
DOD F 441/F 441M |
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 |
|
ASTM C 443 REV A |
Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets |
|
DOD C 443 REV A |
Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets |
|
ASTM B 251 |
Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube |
|
DOD B 251 |
Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube |
|
ASTM F 1667 |
Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
|
DOD F 1667 |
Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
|
ANSI D 3261 |
Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing |
|
ASTM D 3261 |
Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing |
|
DOD D 3261 |
Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing |
|
ANSI E 814 |
Standard Test Method for Fire Tests of Through-Penetration Fire Stops |
|
ASTM E 814 |
Standard Test Method for Fire Tests of Through-Penetration Fire Stops |
|
DOD E 814 |
Standard Test Method for Fire Tests of Through-Penetration Fire Stops |
|
ANSI A 778 |
Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products |
|
ASTM A 778 |
Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products |
|
DOD 325 |
UL Standard for Safety Door, Drapery, Gate, Louver, and Window Operators and Systems-Fifth Edition; Reprint with Revisions Through and Including 02/21/2006 |
|
UL 325 |
UL Standard for Safety Door, Drapery, Gate, Louver, and Window Operators and Systems-Fifth Edition; Reprint with Revisions Through and Including 02/21/2006 |
|
ASTM A 792/A 792M REV A |
Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process |
|
DOD A 792/A 792M REV A |
Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process |
|
ANSI B16.29 |
Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings - DWV |
|
ASME B16.29 |
Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings - DWV |
|
DOD B16.29 |
Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings - DWV |
|
DOD 58 |
UL Standard for Safety Steel Underground Tanks for Flammable and Combustible Liquids-Ninth Edition; Reprint with Revisions Through and Including 07/27/1998 |
|
UL 58 |
UL Standard for Safety Steel Underground Tanks for Flammable and Combustible Liquids-Ninth Edition; Reprint with Revisions Through and Including 07/27/1998 |
|
ANSI D 2412 |
Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading |
|
ASTM D 2412 |
Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading |
|
DOD D 2412 |
Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading |
|
ASTM B 42 |
Standard Specification for Seamless Copper Pipe, Standard Sizes |
|
DOD B 42 |
Standard Specification for Seamless Copper Pipe, Standard Sizes |
|
ASTM E 90 |
Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements |
|
DOD E 90 |
Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements |
|
DOD TIA/EIA-568-B.3-1 |
Optical Fiber Cabling Components Standard; Addendum 1 - Additional Transmission Performance Specifications for 50/125 um Optical Fiber Cables-Addendum No. 1 to TIA/EIA-568-B.3 |
|
EIA TIA/EIA-568-B.3-1 |
Optical Fiber Cabling Components Standard; Addendum 1 - Additional Transmission Performance Specifications for 50/125 um Optical Fiber Cables-Addendum No. 1 to TIA/EIA-568-B.3 |
|
TIA TIA/EIA-568-B.3-1 |
Optical Fiber Cabling Components Standard; Addendum 1 - Additional Transmission Performance Specifications for 50/125 um Optical Fiber Cables-Addendum No. 1 to TIA/EIA-568-B.3 |
|
ASHRAE FUN SI HDBK |
2005 ASHRAE Handbook Fundamentals SI Edition-***For IHS ASHRAE Subscription Customers Only - Contact IHS/Retail (1-800-854-7179) for One Complimentary CD-ROM*** |
|
ASHRAE 34 |
Designation and Safety Classification of Refrigerants-Includes ANSI/ASHRAE addenda listed in Appendix C; Addenda A,B,C,E,F,K,N,O,P,Q,R,S, and U: 2006; 2006 SUPPLEMENT to Addenda A,B,C,E,F,K,N,O,P,Q,R,S, and U; Addenda's G and H: 06/29/2006 |
|
ASME A112.18.1 |
Plumbing Fixture Fittings |
|
DOD TIA/EIA-568 SET |
Commercial Building Telecommunications Cabling Standard Part 1: General Requirements, Part 2: Balanced Twisted-Pair Cabling Components, and Part 3: Optical Fiber Cabling Components Standard-Revision B; Includes Addendums: B.1-1, B.1-2, B.1-3, B.1-4, B.1-5, B.1-7, B.2-1, B.2-2, B.2-3, B.2-4, B.2-4, B.2-5, B.2-6, B.2-9, B.2-11, and B.3-1 12/02/2005 |
|
EIA TIA/EIA-568 SET |
Commercial Building Telecommunications Cabling Standard Part 1: General Requirements, Part 2: Balanced Twisted-Pair Cabling Components, and Part 3: Optical Fiber Cabling Components Standard-Revision B; Includes Addendums: B.1-1, B.1-2, B.1-3, B.1-4, B.1-5, B.1-7, B.2-1, B.2-2, B.2-3, B.2-4, B.2-4, B.2-5, B.2-6, B.2-9, B.2-11, and B.3-1 12/02/2005 |
|
TIA TIA/EIA-568 SET |
Commercial Building Telecommunications Cabling Standard Part 1: General Requirements, Part 2: Balanced Twisted-Pair Cabling Components, and Part 3: Optical Fiber Cabling Components Standard-Revision B; Includes Addendums: B.1-1, B.1-2, B.1-3, B.1-4, B.1-5, B.1-7, B.2-1, B.2-2, B.2-3, B.2-4, B.2-4, B.2-5, B.2-6, B.2-9, B.2-11, and B.3-1 12/02/2005 |
|
ANSI E 330 |
Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference |
|
ASTM E 330 |
Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference |
|
DOD E 330 |
Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference |
|
ANSI D 2564 |
Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems |
|
ASTM D 2564 |
Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems |
|
DOD D 2564 |
Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems |
|
ASTM A 888 REV A |
Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications |
|
ASTM C 1396/C 1396M REV A |
Standard Specification for Gypsum Board |
|
ANSI D 3212 REV A |
Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals |
|
ASTM D 3212 REV A |
Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals |
|
DOD D 3212 REV A |
Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals |
|
ANSI F 876 |
Standard Specification for Crosslinked Polyethylene (PEX) Tubing |
|
ASTM F 876 |
Standard Specification for Crosslinked Polyethylene (PEX) Tubing |
|
ANSI A 254 |
Standard Specification for Copper-Brazed Steel Tubing |
|
ASTM A 254 |
Standard Specification for Copper-Brazed Steel Tubing |
|
DOD A 254 |
Standard Specification for Copper-Brazed Steel Tubing |
|
CSA/AM CSA/ANSI Z21.15B |
Manually Operated Gas Valves for Appliances, Appliance Connector Valves and Hose End Valves-First Edition |
|
ASTM C 700 |
Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated |
|
DOD C 700 |
Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated |
|
ASTM D 226 |
Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing |
|
DOD D 226 |
Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing |
|
ASTM C 14 REV A |
Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe |
|
DOD C 14 REV A |
Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe |
|
ASTM D 312 |
Standard Specification for Asphalt Used in Roofing |
|
DOD D 312 |
Standard Specification for Asphalt Used in Roofing |
|
DOD 923 |
UL Standard for Safety Microwave Cooking Appliances-Fifth Edition; Reprint With Revisions Thru and Including June 19, 2007 |
|
UL 923 |
UL Standard for Safety Microwave Cooking Appliances-Fifth Edition; Reprint With Revisions Thru and Including June 19, 2007 |
|
ASTM C 129 |
Standard Specification for Nonloadbearing Concrete Masonry Units |
|
DOD C 129 |
Standard Specification for Nonloadbearing Concrete Masonry Units |
|
ASTM C 207 |
Standard Specification for Hydrated Lime for Masonry Purposes |
|
DOD C 207 |
Standard Specification for Hydrated Lime for Masonry Purposes |
|
ANSI D 2846/D 2846M |
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems |
|
ASTM D 2846/D 2846M |
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems |
|
DOD D 2846/D 2846M |
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems |
|
ASTM A 996/A 996M REV A |
Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement |
|
ASTM B 828 |
Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings |
|
ASTM C 62 |
Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale) |
|
DOD C 62 |
Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale) |
|
ANSI F 877 |
Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems |
|
ASTM F 877 |
Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems |
|
ANSI A112.19.2M |
Vitreous China Plumbing Fixtures and Hydraulic Requirements for Water Closets and Urinals-Revision and Consolidation of ASME A112.19.2M and ASME A112.19.6 |
|
ASME A112.19.2M |
Vitreous China Plumbing Fixtures and Hydraulic Requirements for Water Closets and Urinals-Revision and Consolidation of ASME A112.19.2M and ASME A112.19.6 |
|
DOD A112.19.2M |
Vitreous China Plumbing Fixtures and Hydraulic Requirements for Water Closets and Urinals-Revision and Consolidation of ASME A112.19.2M and ASME A112.19.6 |
|
ASTM D 3462 |
Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules |
|
DOD D 3462 |
Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules |
|
ASTM C 411 |
Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation |
|
DOD C 411 |
Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation |
|
ANSI D 2104 |
Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 |
|
ASTM D 2104 |
Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 |
|
ANSI Z97.1 |
Safety Glazing Materials Used in Buildings – Safety Performance Specifications and Methods of Test |
|
DOD Z97.1 |
Safety Glazing Materials Used in Buildings – Safety Performance Specifications and Methods of Test |
|
CSA B137 SERIES-05 |
Thermoplastic Pressure Piping Compendium-Third Edition |
|
ANSI D 2239 |
Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter |
|
ASTM D 2239 |
Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter |
|
DOD D 2239 |
Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter |
|
ASTM D 41 |
Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing-E-1; AASHTO No.: M116 |
|
DOD D 41 |
Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing-E-1; AASHTO No.: M116 |
|
DOD 795 |
UL Standard for Safety Commercial-Industrial Gas Heating Equipment-Sixth Edition |
|
UL 795 |
UL Standard for Safety Commercial-Industrial Gas Heating Equipment-Sixth Edition |
|
ASTM A 377 |
Standard Index of Specifications for Ductile-Iron Pressure Pipe |
|
ANSI 181 |
UL Standard for Safety Factory-Made Air Ducts and Connectors-Tenth Edition |
|
DOD 181 |
UL Standard for Safety Factory-Made Air Ducts and Connectors-Tenth Edition |
|
UL 181 |
UL Standard for Safety Factory-Made Air Ducts and Connectors-Tenth Edition |
|
ASTM C 208 |
Standard Specification for Cellulosic Fiber Insulating Board |
|
DOD C 208 |
Standard Specification for Cellulosic Fiber Insulating Board |
|
ASTM C 1002 |
Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs |
|
DOD C 1002 |
Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs |
|
ANSI 14 |
Plastics Piping System Components and Related Materials-Printed 03/28/2007 |
|
DOD 14 |
Plastics Piping System Components and Related Materials-Printed 03/28/2007 |
|
NSF 14 |
Plastics Piping System Components and Related Materials-Printed 03/28/2007 |
|
ASTM B 813 |
Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube |
|
ANSI E 1886 |
Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
|
ASTM E 1886 |
Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
|
ANSI F 493 |
Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings |
|
ASTM F 493 |
Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings |
|
DOD F 493 |
Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings |
|
ASTM A 525 REV B |
STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR STEEL SHEET, ZINC- COATED (GALVANIZED) BY THE HOT-DIP PROCESS-Discontinued 1994; No Replacement |
|
ASTM C 425 |
Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings |
|
DOD C 425 |
Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings |
|
ANSI D 2447 |
Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter |
|
ASTM D 2447 |
Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter |
|
ASCE 32-01 |
Design and Construction of Frost-Protected Shallow Foundations |
|
ASTM C 1063 |
Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster |
|
DOD C 1063 |
Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster |
|
ASTM A 510M |
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric] |
|
DOD A 510M |
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric] |
|
ANSI ANSI Z21.11.2 |
Gas-Fired Room Heaters Volume II, Unvented Room Heaters-Twenty-Fifth Edition |
|
CSA/AM ANSI Z21.11.2 |
Gas-Fired Room Heaters Volume II, Unvented Room Heaters-Twenty-Fifth Edition |
|
ANSI D 2661 |
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings |
|
ASTM D 2661 |
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings |
|
DOD D 2661 |
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings |
|
ASTM B 370 |
Standard Specification for Copper Sheet and Strip for Building Construction |
|
DOD B 370 |
Standard Specification for Copper Sheet and Strip for Building Construction |
|
ANSI A112.6.3 |
Floor Drains and Trench Drains |
|
ASME A112.6.3 |
Floor Drains and Trench Drains |
|
DOD A112.6.3 |
Floor Drains and Trench Drains |
|
ASTM C 847 |
Standard Specification for Metal Lath |
|
DOD C 847 |
Standard Specification for Metal Lath |
|
ANSI 80 |
UL Standard for Safety Steel Tanks for Oil-Burner Fuel-Eleventh Edition |
|
DOD 80 |
UL Standard for Safety Steel Tanks for Oil-Burner Fuel-Eleventh Edition |
|
UL 80 |
UL Standard for Safety Steel Tanks for Oil-Burner Fuel-Eleventh Edition |
|
ASTM C 954 |
Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs From 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness |
|
DOD C 954 |
Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs From 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness |
|
ASTM C 475/C 475M |
Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board |
|
DOD C 475/C 475M |
Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board |
|
DOD 174 |
UL Standard for Safety Household Electric Storage Tank Water Heaters-Eleventh Edition; Reprint with Revisions Through and Including May 19, 2006 |
|
UL 174 |
UL Standard for Safety Household Electric Storage Tank Water Heaters-Eleventh Edition; Reprint with Revisions Through and Including May 19, 2006 |
|
ASTM A 951/A 951M |
Standard Specification for Steel Wire for Masonry Joint Reinforcement |
|
ASTM A 875/A 875M |
Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process |
|
ASTM C 27 |
Standard Classification of Fireclay and High-Alumina Refractory Brick |
|
DOD C 27 |
Standard Classification of Fireclay and High-Alumina Refractory Brick |
|
ASTM D 4829 |
Standard Test Method for Expansion Index of Soils |
|
ANSI TIA-570-B |
Residential Telecommunications Infrastructure Standard |
|
DOD TIA-570-B |
Residential Telecommunications Infrastructure Standard |
|
EIA TIA-570-B |
Residential Telecommunications Infrastructure Standard |
|
TIA TIA-570-B |
Residential Telecommunications Infrastructure Standard |
|
ASTM D 4586 |
Standard Specification for Asphalt Roof Cement, Asbestos-Free |
|
DOD D 4586 |
Standard Specification for Asphalt Roof Cement, Asbestos-Free |
|
ANSI A112.19.3 |
Stainless Steel Plumbing Fixtures (Designed for Residential Use)-Supplement: September 2002 |
|
ASME A112.19.3 |
Stainless Steel Plumbing Fixtures (Designed for Residential Use)-Supplement: September 2002 |
|
ANSI F 891 |
Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core |
|
ASTM F 891 |
Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core |
|
ASTM C 836 |
Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course |