IHS Inc. The Source for Critical Information and Insight
Construction |  Change  

Go
 
 

BHMA Standards Collection

BHMA - Builders Hardware Manufacturers Association

BHMA Standards Collection Description

Popular Standards from this Collection.

BHMA A156.3

Exit Devices

BHMA A156.1

Butts and Hinges

BHMA A156.18

Materials and Finishes

BHMA A156.19

Power Assist and Low Energy Power Operated Doors

BHMA A156.17

SELF CLOSING HINGES & PIVOTS

BHMA A156.13

Mortise Locks & Latches

BHMA A156.2

Bored and Preassembled Locks & Latches

BHMA A156.20

Strap and Tee Hinges, and Hasps

BHMA A156.4

Door Controls - Closers

BHMA A156.10

Power Operated Pedestrian Doors

BHMA A156.16

Auxiliary Hardware

BHMA A156.9

Cabinet Hardware

BHMA A156.5

Auxiliary Locks & Associated Products

BHMA A156.7

Template Hinge Dimensions

BHMA A156.6

ARCHITECTURAL DOOR TRIM

BHMA A156.8

Door Controls - Overhead Stops and Holders

BHMA A156.12

Interconnected Locks

BHMA A156.14

Sliding & Folding Door Hardware

BHMA A156.15

Release Devices - Closer Holder, Electromagnetic and Electromechanical

BHMA A156.24

Delayed Egress Locking Systems

BHMA A156.11

Cabinet Locks

BHMA A156.115

HARDWARE PREPARATION IN STEEL DOORS AND STEEL FRAMES

BHMA A156.23

ELECTROMAGNETIC LOCKS

BHMA A156.31

Electric Strikes and Frame Mounted Actuators

BHMA A156.115-W

HARDWARE PREPARATION IN WOOD DOORS WITH WOOD OR STEEL FRAMES

BHMA A156.25

Electrified Locking Devices

BHMA A156.26

Continuous Hinges

BHMA A156.28

Recommended Practices for Keying Systems

BHMA A156.29

Exit Locks, Exit Locks with Exit Alarms, Exit Alarms, Alarms for Exit Devices

BHMA A250.13

Testing and Rating of Severe Windstorm Resistant Components for Swinging Door Assemblies

BHMA A156.22

DOOR GASKETING and EDGE SEAL SYSTEMS

BHMA A156.27

POWER AND MANUAL OPERATED REVOLVING PEDESTRIAN DOORS

BHMA A156.30

High Security Cylinders

BHMA CERTIFIED PRODUCTS DIRECTORY

Certified Products Directory

BHMA A156 SERIES

COMPLETE SET OF ANSI/BHMA A156 STANDARDS WITH BINDERS ***CONTAINS ANSI A156.1 THRU ANSI A156.26, ANSI A156.28, ANSI A156.29, ANSI A156.30 AND ANSI A156.31***

CONSTRUCTION ENGINEERING STANDARDS NEWS
November 11, 2009
AGC, CATF: Highway Projects Need Environmentally Friendly Equipment
The Associated General Contractors (AGC) of America and the Clean Air Task Force (CATF) jointly called on the U.S. Congress to give state officials ... more
November 4, 2009
ICC-ES, UL Create Standards, Codes Verification Program for Plumbing, Mechanical, Fuel Gas Products
ICC Evaluation Service (ICC-ES) and Underwriters Laboratories (UL) established a program for plumbing, mechanical and fuel gas (PMG) products ... more
November 2, 2009
ASTM E2707 Tests Fire Penetration of Exterior Wall Assemblies
ASTM International released ASTM E2707, which addresses the enhanced exterior fire protection of structures in a wildland fire. ... more
October 30, 2009
ASTM WK24836 to Outline Specs for Active Area, Multipurpose Flooring
ASTM International Committee F06 on Resilient Floor Coverings is developing ASTM WK24836 - Specification for Active Area, Multipurpose Flooring. ... more
October 26, 2009
ASTM WK25108 to Outline Rotational Viscotester Used in Road Building
ASTM International is developing ASTM WK25108 - Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other High Viscosity Binders ... more
Show All..