|
CEA CEA-2009- A |
Performance Specification for Public Alert Receivers |
|
CEA CEA- 2028 |
Color Codes for Outdoor TV Receiving Antennas-Contains Color |
|
CEA CEA-23- A |
Measurement Procedures for Determining Compliance with FCC Rules for “Cable-Ready Consumer Electronics Equipment†|
|
CEA CEA- 243 |
Color Coding for Stereo Pick-Up Leads |
|
CEA CEA- 461 |
Phonograph Pick-Ups with 1/2 inch Mounting |
|
CEA CEA- 560 |
Standard Method of Measurement for Compact Disc Players |
|
ECA 199- A |
Solid and Semi-Solid Dielectric Transmission Lines |
|
ECA 403- A |
Precision Coaxial Connectors for CATV Application (75 Ohms) |
|
ECA 407- A |
Testing Procedures for Relays for Electrical and Electronic Equipment |
|
ECA 417- A |
Crystal Outlines |
|
ECA 421- A |
Dry Reed Switches, EIA/NARM Standard for |
|
ECA 567- A |
VHDL Hardware Component Modeling and Interface Standard |
|
ECA 7000000- A |
Generic Specification for Electronic and Electrical Connectors of Certified Quality (for Frequencies Essentially Below 3 MHz) |
|
ECA 700A0AA |
Detail Specification for 1.27 mm Pitch, Ribbon Contact, Trapezoidal Shaped, Shielded I/O Connector |
|
ECA 700A0AB |
Detail Specification for 1.27 mm Pitch, 68 Circuit Memory Card Interconnect System |
|
ECA 700A0AD |
Detail Specification for the Interface of the 1.27 mm Pitch, Ribbon Contact (Leaf Spring), Trapezoidal Shaped, Self-Locking I/O Connector |
|
ECA 700AAAB |
Detail Specification for 1.0 mm, Two-Part Connectors for Use with Parallel Printed Boards |
|
ECA 700AOAC |
Detail Specification for 1.00 mm Pitch, 88 Circuit Dram Memory Card Interconnect System |
|
ECA 700AOAE |
Detail Specification for Trapezoidal Connectors with Nonremovable Ribbon Cable Contacts on 1.27mm Pitch Double Row Used with Single Connector Attachments (SCA2) |
|
ECA 700B000 |
Sectional Specification for Rectangular/Trapezoidal Connectors of Certified Quality |
|
ECA 700BA00 |
Blank Detail Specification for Rectangular/Trapezoidal Connectors of Certified Quality |
|
ECA 700C000 |
Sectional Specification for Circular Multicontact Connectors of Assessed Quality (for Frequencies Essentially Below 3 MHz) |
|
ECA 700D000 |
Sectional Specification for Discrete Contacts of Certified Quality (for Use in dc/Low Frequency Analog Applications and in Digital Applications Employing High Speed Data Rates) |
|
ECA EIA-310- D |
Cabinets, Racks, Panels, and Associated Equipment |
|
ECA EIA-616- A |
Detail Specification for 2 Millimeter, Two-Part Connectors for Use with Printed Boards and Backplanes |
|
ECA EIA- 700A0AF |
Detail Specification for Trapezoidal Shielded Connector 0.8 mm Pitch Used with Very High Density Cable Interconnect (VHDCI) |
|
ECA EIA- 700BAAD |
Detail Specification for Shielded Rectangular Connectors for Universal Serial Bus Plus Power Connectors Series "A" |
|
ECA EIA- 700BAAE |
Detail Specification for Shielded Rectangular Connectors for Universal Serial Bus Plus Power Connectors Series "B" |
|
ECA IS- 43 |
Local Area Network Twisted Pair Data Communications Cable Adopted for Use in the U.S. National Electronic Components Quality Assessment System (NECQ- System) |
|
ECA IS- 43AA |
Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 1, Outdoor Cable |
|
ECA IS- 43AB |
Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 1, Non-Plenum Cable |
|
ECA IS- 43AC |
Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 1, Riser Cable |
|
ECA IS- 43AD |
Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 1, Plenum Cable |
|
ECA IS- 43AE |
Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 2, Nonplenum Cable |
|
ECA IS- 43AF |
Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 2, Plenum Cable |
|
ECA IS- 43AG |
Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 6, Office Cable |
|
ECA IS- 43AH |
Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 8, Undercarpet Cable |
|
ECA IS- 43AJ |
Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 9, Plenum Cable |
|
ECA IS- 753 |
Two-Part High Density Blade and Backplane Tuning Fork Connector |
|
ECA IS- 84 |
Interim Detail Specification for 2.5 mm Two Part Connector for Use in Electronic Equipment |
|
EIA 359- A |
Standard Colors for Color Identification and Coding |
|
EIA 359-A- 1 |
Special Colors |
|
GEIA 484- A |
Electrical and Mechanical Interface Characteristics and Line Control Protocol Using Communication Control Characters for Serial Data Link between a Direct Numerical Control System and Numerical Control Equipment Employing Asynchronous Full Duplex Transmis |
|
GEIA 494- B |
32 Bit Binary CL (BCL) and 7 Bit ASCII CL (ACL) Exchange Input Format for Numerically Controlled Machines |
|
GEIA 601- A |
General Procedure for Capability Approval of Electronic Components |
|
GEIA EIA- 681 |
Assessment Guide for Process Certification |
|
JEDEC 419- A |
Standard List of Values to Be Used in Semiconductor Device Specifications and Registration Formats |
|
TIA EIA-411- A |
Electrical and Mechanical Characteristics of Earth Station Antennas for Satellite Communications |
|
TIA TIA/EIA/IS- 680 |
Personal Base Station - Authorization and Call Routing Equipment Compatibility Standard |
|
TIA TIA/EIA-404- B |
Standard for Start-Stop Signal Quality for Non-Synchronous Data Terminal Equipment |
|
TIA TIA/EIA-423- B |
Electrical Characteristics of Unbalanced Voltage Digital Interface Circuits |
|
TIA TIA/EIA-568-B SET |
Commercial Building Telecommunications Cabling Standard Part 1: General Requirements, Part 2: Balanced Twisted-Pair Cabling Components, and Part 3: Optical Fiber Cabling Components Standard-Includes Addendums: B.1-1, B.1-2, B.1-3, B.1-4, B.1-5, B.2-1, B.2 |
|
TIA TIA/EIA-568- B.1 |
Commercial Building Telecommunications Cabling Standard Part 1: General Requirements-Revision of TIA/EIA-568-A |
|
TIA TIA/EIA-568-B.1- 1 |
Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius-Addendum 1: August 2001 |
|
TIA TIA/EIA-568- B.2 |
Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components-Revision of TIA/EIA-568-A; Errata |
|
TIA TIA/EIA-568-B.2- 1 |
Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted Pair Cabling Components Addendum 1 - Transmission Performance Specifications for 4-Pair 100 Category 6 Cabling-Addendum No. 1 to TIA/EIA-568- B.2 |
|
TIA TIA/EIA-568-B.2- 2 |
Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components Addendum 2-Addendum No. 2 to TIA/EIA-568- B.2 |
|
TIA TIA/EIA-568-B.2- 3 |
Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted Pair Cabling Components Addendum 3 - Additional Considerations for Insertion Loss and Return Loss Pass/Fail Determination-Addendum No. 3 to TIA/EIA-568- B.2 |
|
TIA TIA/EIA-568-B.2- 4 |
Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted Pair Cabling Components Addendum 4 - Solders Connection Reliability Requirements for Copper Connecting Hardware-Addendum 4: June 2002 |
|
TIA TIA/EIA-568- B.3 |
Optical Fiber Cabling Components Standard |
|
TIA TIA/EIA-568-B.3- 1 |
Optical Fiber Cabling Components Standard; Addendum 1 - Additional Transmission Performance Specifications for 50/125 um Optical Fiber Cables-Addendum No. 1 to TIA/EIA-568-B.3 |
|
TIA TIA/EIA-571- A |
Telecommunications User Premises Equipment Environmental Considerations |
|
TIA TIA/EIA-578- B |
Asynchronous Facsimile DCE Control Standard, Service Class 1-Revision of TIA/EIA-578-A |
|
TIA TIA/EIA-579- A |
Telecommunications Telephone Terminal Equipment Transmission Requirements for Digital Wireline Telephones |
|
TIA TIA/EIA- 604 |
Fiber Optic Connector Intermateability Standards (FOCIS) |
|
TIA TIA/EIA-604- 10A |
FOCIS 10 Fiber Optic Connector Intermateability Standard - Type LC |
|
TIA TIA/EIA-604- 12 |
FOCIS 12 Fiber Optic Connector Intermateability Standard Type MT- RJ |
|
TIA TIA/EIA-604- 6 |
FOCIS 6 Fiber Optic Connector Intermateability Standard (Fiber Jack Connector) |
|
TIA TIA/EIA-606- A |
Administration Standard for the Telecommunications Infrastructure |
|
TIA TIA/EIA- 617 |
Data Transmission Systems and Equipment In-Band DCE Control |
|
TIA TIA/EIA-644- A |
Electrical Characteristics of Low Voltage Differential Signaling (LVDS) Interface Circuits-Revision of TIA/EIA-644 |
|
TIA TIA/EIA- 687 |
Medium Speed Interface for Data Terminal Equipment and Data Circuit Terminating Equipment |
|
TIA TIA/EIA- 694 |
Electrical Characteristics for an Unbalanced Digital Interface for Data Signaling Rates up to 512 Kbit/s |
|
TIA TIA-232- F |
Interface between Data Terminal Equipment and Data Circuit-Terminating Equipment Employing Serial Binary Data Interchange |
|
TIA TIA-334- C |
Signal Quality at Interface Between Data Terminal Equipment and Synchronous Data Circuit-Terminating Equipment for Serial Data Transmission |
|
TIA TIA-422- B |
Electrical Characteristics of Balanced Voltage Digital Interface Circuits |
|
TIA TIA-485- A |
Electrical Characteristics of Generators and Receivers for Use in Balanced Digital Multipoint Systems |
|
TIA TIA-530- A |
High Speed 25 Position Interface for Data Terminal Equipment and Data Circuit-Terminating Equipment, Including Alternative 26-Position Connector |
|
TIA TIA- 561 |
Simple 8 Position Non-Synchronous Interface Between Data Terminal Equipment and Data circuit-Terminating Equipment Employing Serial Binary Data Interchange |
|
TIA TIA- 562 |
Electrical Characteristics for an Unbalanced Digital Interface |
|
TIA TIA-568-B.1- 2 |
Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 2 - Grounding and Bonding Specifications for Screened Balanced Twisted-Pair Horizontal Cabling-Addendum 2: February 2003 |
|
TIA TIA-568-B.1- 3 |
Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 3 - Supportable Distances and Channel Attenuation for Optical Fiber Applications by Fiber Type-Addendum 3: February 2003 |
|
TIA TIA-568-B.1- 4 |
Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 4 - Recognition of Category 6 and 850 nm Laser-Optimized 50/125 um Multimode Optical Fiber Cabling-Addendum 4: February 2003 |
|
TIA TIA-568-B.1- 5 |
Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 5 Telecommunications Cabling for Telecommunications Enclosures-Addendum 5: March 2003 |
|
TIA TIA-568-B.1- 7 |
Commercial Building Telecommunications Cabling Standard Part 1 - General Requirements Addendum 7 Guidelines for Maintaining Polarity Using Array Connectors-Addendum 7 |
|
TIA TIA-568-B.2- 11 |
Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components Addendum 11 Specification of 4-Pair UTP and SCTP Cabling-Addendum 11: DECEMBER 2005 |
|
TIA TIA-568-B.2- 5 |
Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted Pair Cabling Components Addendum 5 - Corrections to TIA/EIA-568-B.2- Addendum 5: January 2003 |
|
TIA TIA-568-B.2- 6 |
Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted Pair Cabling Components Addendum 6 Category 6 Related Component Test Procedures-Addendum 6: October 2003 |
|
TIA TIA-569- B |
Commercial Building Standard for Telecommunications Pathways and Spaces |
|
TIA TIA-570- B |
Residential Telecommunications Infrastructure Standard |
|
TIA TIA-573A000- A |
Sectional Specification for Field-Portable Optical-Fiber Cleaving Tools |
|
TIA TIA-573B000- A |
Sectional Specification for Field-Portable Single-Optical-Fiber Stripping Tools |
|
TIA TIA- 574 |
9-Position Non-Synchronous Interface Between Data Terminal Equipment and Data Circuit-Terminating Equipment Employing Serial Binary Data Interchange |
|
TIA TIA-602- A |
Data Transmission Systems and Equipment Serial Asynchronous Automatic Dialing and Control |
|
TIA TIA-603- C |
Land Mobile FM or PM - Communications Equipment - Measurement and Performance Standards |
|
TIA TIA-604- 1 |
FOCIS 1 Fiber Optic Connector Intermateability Standard |
|
TIA TIA-604-13- A |
FOCIS-13 Fiber Optic Connector Intermateability Standard, Type SFOC 1.25 |
|
TIA TIA-604- 15 |
FOCIS-15 Fiber Optic Connector Intermateability Standard Type MF |
|
TIA TIA-604-16- B |
FOCIS 16 Fiber Optic Connector Intermateability Standard Type LSH |
|
TIA TIA-604- 17 |
FOCIS 17 Fiber Optic Connector Intermateability Standard, Type MU |
|
TIA TIA-604-2- B |
FOCIS-2 Fiber Optic Connector Intermateability Standard, Type ST |
|
TIA TIA-604-3- B |
FOCIS-3 Fiber Optic Connector Intermateability Standard, Type SC and SC-APC |
|
TIA TIA-604-4- B |
FOCIS-4 Fiber Optic Connector Intermateability Standard, Type FC and FC-APC |
|
TIA TIA-604-5- C |
FOCIS-5 Fiber Optic Connector Intermateability Standard, Type MPO |
|
TIA TIA-604- 7A |
FOCIS-7 Fiber Optic Connector Intermateability Standard - Type SG |
|
TIA TIA- 605 |
Facsimile DCE-DTE Packet Protocol Standard |
|
TIA TIA- 6090000 |
Generic Specification for Optical Fiber Splices |
|
TIA TIA- 609A000 |
Sectional Specification for Conventional, Permanent, Optical Fiber Splices |
|
TIA TIA- 609AA00 |
Blank Detail Specification for Conventional, Permanent, Optical Fiber Splices |
|
TIA TIA- 612 |
Electrical Characteristics for an Interface at Data Signaling Rates up to 52 Mbit/s |
|
TIA TIA- 613 |
High Speed Serial Interface for Data Terminal Equipment and Data Circuit-Terminating Equipment |
|
TIA TIA- 619 |
Aggregation of Multiple Independent 56 Kbits/s or 64 Kbits/s Channels into a Synchronized Wideband Connection |
|
TIA TIA-683- C |
Over-the-Air Service Provisioning of Mobile Stations in Spread Spectrum Systems |
|
TIA TIA- 688 |
DTE/DCE Interface for Digital Cellular Equipment |
|
TIA TIA-689- A |
Telecommunications Multiline Terminal Systems PBX and KTS Support of Enhanced 9-1-1 Emergency Calling Service |
|
TIA TIA-758- A |
Customer-owned Outside Plant Telecommunications Infrastructure Standard |
|
TIA TIA- 942 |
Telecommunications Infrastructure Standard for Data Centers |
|
TIA TSB-18- A |
Mechanical/Functional Characteristics of the Interface between DCEs and Voiceband Analog Channels |
|
TIA TSB31- B |
Part 68 Rationale and Measurement Guidelines |
|
TIA TSB-54- B |
DTE/DCE Interface Selection Guide |
|
TIA TSB70- A |
FSK Air Interface Common Message Protocol Cross-Reference |
|
TIA TSB-89- A |
Application Guidelines for TIA/EIA-485-A |