 |
| Purchase Information |
| Use this form to request purchase information on ASTM online subscriptions. |
|
|
Document ASTM F 1499 is offered by IHS as part of an online subscription. This subscription contains many documents on the same topic.
You may also purchase this document alone from the IHS Standards Store.
ASTM F 1499 Document Information:
Title
Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)
ASTM International
Publication Date:
Aug 10, 2001
Scope:
This specification covers coextruded composite drain, waste, and
vent pipe (DWV). The pipe is produced in Schedule 40 IPS sizes by a
coextrusion die system, in which the concentric layers are formed
and combined before exiting the die.
Coextruded composite drain, waste, and vent pipe, DWV, by
definition, is permitted to be produced with two or more layers.
The outer layer shall be ABS. The middle layer is permitted to be
thermally foamed PVC or solid PVC or a blend of rework material, as
specified in the rework material section. The inner layer is
permitted to be solid PVC or ABS, or a blend of rework material as
specified in the rework material section.
The function of this specification is to provide standardization
of product, technical data, and serve as a purchasing guide.
DWV is permitted to be produced utilizing a two layer or three
layer coextrusion die.
Materials that do not meet the requirements of the material
section are excluded.
Pipe produced to this specification is permitted to be joined
using molded fittings meeting the requirements of Specification D
2661 or Specification F 628. The fitting patterns must comply with
Specification D 3311.
Pipe produced to this specification is permitted to be
perforated in accordance with any specified standard or by
agreement between the purchaser and the supplier.
Pipe produced to this specification is permitted to be belled
for joining by solvent cementing or belled for joining by an
elastomeric seal (gasket), in accordance with any specified
standard or by agreement between the purchaser and the
supplier.
Recommendations for storage, joining, and installation are
provided in Appendix X1, Appendix X2, and Appendix X3,
respectively.
The values stated in inch-pound units are to be regarded as the
standard. The SI units given in parentheses are for information
only.
The text of this specification references notes, footnotes, and
appendixes which provide explanatory material. These notes and
footnotes (excluding those in tables and figures) shall not be
considered as requirements of this specification.
The values stated in inch-pound units are to be regarded as
standard. The values given in parentheses are mathematical
conversions to SI units that are provided for information only and
are not considered standard.
This standard does not purport to address all of the safety
concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and
health practices and determine the applicability of regulatory
limitations prior to use.
NOTE 1—Specifications related to this specification are as
follows: Specifications D 2661, D 2665, F 628, and F 891.
Keywords:
- ABS
- cellular
- coextruded
- composite
- PVC
About IHS
IHS (NYSE: IHS) is a leading global provider of critical technical information, decision-support tools and related services in a number of industries including aerospace and defense, automotive, construction, electronics, and energy. IHS serves customers ranging from large governments and multinational corporations to smaller companies and technical professionals in more than 100 countries. IHS been in business for more than 45 years and employ more than 2,300 people around the world.
