 |
| Purchase Information |
| Use this form to request purchase information on ASTM online subscriptions. |
|
|
Document ASTM F 891 is offered by IHS as part of an online subscription. This subscription contains many documents on the same topic.
You may also purchase this document alone from the IHS Standards Store.
ASTM F 891 Document Information:
Title
Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
ASTM International
Publication Date:
Nov 1, 2007
Scope:
This specification covers coextruded poly(vinyl chloride) (PVC)
plastic pipe with a cellular core and concentric inner and outer
solid layers, and is produced using a multilayer coextrusion die
for nonpressure use in three series: an IPS Schedule 40 series; a
PS series with an iron pipe size outside diameter with varying wall
thickness as required for pipe stiffness of 25, 50, and 100; and a
sewer and drain series.
The function of this specification is to provide standardization
of product-technical data and serve as a purchasing guide.
The text of this specification references notes, footnotes, and
appendixes which provide explanatory material. The notes and
footnotes (excluding those in tables and figures) shall not be
considered as requirements of the specification.
NOTE 1—All the pipe series covered by this specification are
permitted to be perforated or belled for joining by solvent cement
or belled for joining by an elastomeric seal (gasket). Because this
pipe is OD controlled, the inside diameter will vary, and
therefore, the pipe ID is not suitable for use as a socket.
NOTE 2—This standard specifies dimensional, performance and test
requirements for plumbing and fluid handling applications, but does
not address venting of combustion gases.
This standard does not purport to address all of the safety
concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and
health practices and determine the applicability of regulatory
limitations prior to use.
The values stated in inch-pound units are to be regarded as the
standard.
NOTE 3—Specifications related to this specification are as
follows: D 2665, D 2729, D 3034, F 512, F 758, and F 789.
*A Summary of Changes section appears at the end of this
standard.
Keywords:
- cellular core
- coextruded
- drain
- waste
- and vent
- PVC
- Schedule 40
- thermoplastic
About IHS
IHS (NYSE: IHS) is a leading global provider of critical technical information, decision-support tools and related services in a number of industries including aerospace and defense, automotive, construction, electronics, and energy. IHS serves customers ranging from large governments and multinational corporations to smaller companies and technical professionals in more than 100 countries. IHS been in business for more than 45 years and employ more than 2,300 people around the world.
