NIST Fire Tests Examine Structural Collapse Hazards, Warning Devices
December 13, 2007 // Published as a news service by IHS
| |
| Construction Industry Tools |
IHS sells a full selection of ICC building codes as well as Plan Analyst software to check compliance.
To learn more, and for a free quote, please complete the form below. |
|
The National Institute of Standards and Technology (NIST) recently conducted experiments on the hazards of fires under residential floors, which can surprise firefighters by hastening structural collapse, and on technologies, such as thermal imagers and acoustic devices, that firefighters might use to assess the danger of collapse.
The test burns are part of a multi-year NIST project to investigate potential tools and techniques for predicting structural collapse.
NIST previously conducted a series of structural collapse fire tests with support from the U.S. Fire Administration (USFA), part of the U.S. Department of Homeland Security (DHS).
Experts said approximately 20% of the deaths of firefighters in structure fires over the past 10 years have been as a result of structural collapse. Predicting a potential collapse is one of the most challenging tasks facing an incident commander at a fire scene.
Usually the lack of information on the building construction, fire size, fire location, fire burn time, building condition, fuel load and other factors makes the task nearly impossible.
To gain a better understanding of the factors, NIST fire engineers built and burned multiple wood frame, two-story structures. The test scenario simulated a situation in which a fire begins in the basement level, posing a risk to firefighters entering on the first floor.
The experiment explored the effects of thermal exposure and weight loading on various building construction types and materials. An array of instruments recorded time and temperature data until the structure collapsed. Sensors also provided comparative data on the effect of different common floor coverings and structural design on the progress of the fire.
NIST fire engineers used three different types of thermal imaging (barium strontium titanate, vanadium oxide and amorphous silicon detectors) to track the spread of the heat through the flooring materials. The researchers also collected data from a prototype acoustical device that is designed to detect structural movement in advance of a collapse. Subsequent analysis should reveal the technology's capabilities to warn of impending structural collapse.
NIST will publish its findings from the Delaware County fire experiments in 2008.
Source: National Institute of Standards and Technology (NIST).